Brother International Innov-is 1000 Operation Manual - Page 139
Removing the embroidery unit, Replacing the bobbin case
View all Brother International Innov-is 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
EMBROIDERY Removing the embroidery unit Make sure that the sewing machine is completely stopped and follow the instructions below. Remove the embroidery frame. a • For details on removing the embroidery frame, refer to "Removing the embroidery frame" (page 144). Press , and then press . b Hold the release button on the bottom left of d the embroidery unit, and slowly pull the embroidery unit to the left. a X The embroidery carriage moves into a position where it can be stored. Turn off the sewing machine. c CAUTION ● Always turn off the sewing machine before removing the embroidery unit. It may cause malfunctions if removed when the machine is turned on. a Release button X The embroidery unit separates from the sewing machine. CAUTION ● Do not carry the embroidery unit by holding the release button compartment. Replacing the bobbin case Use embroidery bobbin thread intended for use with this machine (page 9). When using other kinds of embroidery bobbin thread, use the optional alternate bobbin case (pink marking). (The bobbin case originally installed in the machine has a green marking.) For details on how to remove the bobbin case, refer to "Cleaning the race" (page 164). 138