Brother International Innov-is NS80e Operation Manual - Page 12

LCD Operation

Get Brother International Innov-is NS80e PDF manuals and user guides View all Brother International Innov-is NS80e manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

LCD Operation LCD Operation When the machine is turned on, the LCD will light up and the following screen is displayed. To change the displayed settings, use the operation keys and stitch pattern selection dial. The LCD differs depending on the model. ab c d cd fe fe No. Display Item Name 1 Presser foot 2 - Stitch number 3 Needle position setting 4 Stitch length 5 Stitch width 6 Automatic reverse/ reinforcement stitching Explanation Shows the symbol for the presser foot to be used. Before sewing, attach one of the presser feet shown here. Zigzag foot "J" Buttonhole foot "A" Monogramming foot "N" Blind stitch foot "R" Overcasting foot "G" * The symbols for certain presser feet, such as zipper foot "I" and the quilting foot, may not appear in the screen. Shows the number of the currently selected stitch pattern. Shows whether the needle is in the programmed raised or lowered position. In addition, shows whether the single needle mode or twin needle mode is selected. (The twin needle mode indicator appears only on models equipped with the needle mode selection key.) : Single needle/down position : Twin needle/down position : Single needle/up position : Twin needle/up position Shows the stitch length of the currently selected stitch pattern. Shows the stitch width of the currently selected stitch pattern. Shows the automatic reverse/reinforcement stitching is currently turned on. Page 21 33 11 27 27 25 Memo • On models without the stitch number and the presser foot displayed in the LCD, the stitch number and presser foot are shown in the stitch pattern display window. 1 Stitch number a 2 Presser foot b 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
LCD Operation
10
When the machine is turned on, the LCD will light up and the following screen is displayed.
To change the displayed settings, use the operation keys and stitch pattern selection dial.
The LCD differs depending on the model.
LCD Operation
No.
Display
Item Name
Explanation
Page
1
Presser foot
Shows the symbol for the presser foot to be used. Before sewing, attach one of the
presser feet shown here.
21
Zigzag foot “J”
Buttonhole foot “A”
Monogramming foot “N”
Blind stitch foot “R”
Overcasting foot “G”
*
The symbols for certain presser feet, such as zipper foot “I” and the quilting foot,
may not appear in the screen.
2
–
Stitch number
Shows the number of the currently selected stitch pattern.
33
3
Needle position setting
Shows whether the needle is in the programmed raised or lowered position. In
addition, shows whether the single needle mode or twin needle mode is selected.
(The twin needle mode indicator appears only on models equipped with the needle
mode selection key.)
11
: Single needle/down position
: Twin needle/down position
: Single needle/up position
: Twin needle/up position
4
Stitch length
Shows the stitch length of the currently selected stitch pattern.
27
5
Stitch width
Shows the stitch width of the currently selected stitch pattern.
27
6
Automatic reverse/
reinforcement stitching
Shows the automatic reverse/reinforcement stitching is currently turned on.
25
Memo
•
On models without the stitch number and the presser foot displayed in the LCD, the stitch number and presser foot are
shown in the stitch pattern display window.
b
a
c
d
f
e
c
d
f
e
1
Stitch number
2
Presser foot
a
b