Brother International Innov-is NS80e Operation Manual - Page 24

Replacing the Presser Foot Removing and attaching the presser foot holder Remove the presser foot holder when cleaning the machine or when installing a presser foot that does not use the presser foot holder, such as the walking foot and quilting foot. ■ Removing the presser foot holder Turn off the machine. a Remove the presser foot. b • For details, refer to "Replacing the presser foot" on page 21. Use the screwdriver to loosen the presser foot holder c screw. Turn the screw toward the back of the machine (counterclockwise). • The presser foot holder screw can also be loosened or tightened with the disc-shaped screwdriver. Hold the presser foot holder in place with your right d hand, and then tighten the screw using the screwdriver in your left hand. Turn the screw toward you (clockwise). CAUTION • Be sure to securely tighten the presser foot holder screw, otherwise the presser foot holder may fall off and the needle may strike it, causing the needle to bend or break. ■ Attaching the presser foot holder Turn off the machine. a Raise the presser foot lever. b Align the notch in the presser foot holder with the c screw. 1 Screw 2 Notch in presser foot holder a b 22