Brother International Innov-is NS80e Operation Manual - Page 20

Upper Threading Raise the presser foot lever, pass the end of the thread r through and under the presser foot, and then pull out about 5 cm (approx. 2 inches) of thread toward the rear of the machine. Pull up the bobbin thread, pass it under the presser g foot and pull it about 10 cm (4 inches) toward the back of the machine, making it even with the upper thread. Turn on the machine. s Reattach the bobbin cover. h Pulling up the bobbin thread If the threads will be pulled to create gathers or the thread at the beginning of sewing will be finished, for example, when free motion quilting, first pull up the bobbin thread. Refer to "Threading the upper thread" on page 15 to a thread the machine with the upper thread and thread the needle. Follow steps a to f "Installing the bobbin" on b page 14 for installing the bobbin and to insert the bobbin into the bobbin case. Pass the bobbin thread through the slot. c Do not cut the thread with the cutter, otherwise it will be difficult to pull up the bobbin thread. Turn on the machine. d While lightly holding the upper thread with your left e hand, press (Needle position button) twice to lower and then raise the needle.  The bobbin thread is looped around the upper thread and can be pulled up. Carefully pull the upper thread upward to pull out the f end of the bobbin thread. 18