Brother International Innov-is NS80e Operation Manual - Page 59
Troubleshooting
View all Brother International Innov-is NS80e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Troubleshooting Troubleshooting If the machine stops operating correctly, check the following possible problems before requesting service. You can solve most problems by yourself. If you need additional help, the Brother Solutions Center offers the latest FAQs and troubleshooting tips. Visit us at " http:// s.brother/cpjah/ ". If the problem persists, contact your Brother dealer or the nearest Brother authorized service center. ■ Frequent troubleshooting topics Detailed causes and remedies for common troubleshooting topics are described below. Be sure to refer to this before contacting us. Upper thread tightened up page 57 Tangled thread on wrong side of fabric page 57 Incorrect thread tension page 58 Fabric is caught in the machine and cannot be removed page 59 If the thread becomes tangled under the bobbin winder seat page 61 Upper thread tightened up ■ Symptom • The upper thread appears as a single continuous line. • The bobbin thread is visible from the right side of the fabric. (Refer to the illustration below.) • The upper thread has tightened up, and comes out when pulled. • The upper thread has tightened up, and wrinkles appear in the fabric. • The upper thread tension is tight, and the results do not change even after the thread tension is adjusted. c a b d e 1 Wrong side of fabric 2 Bobbin thread visible from right side of fabric 3 Upper thread 4 Right side of fabric 5 Bobbin thread ■ Cause Incorrect bobbin threading If the bobbin thread is incorrectly threaded, instead of the appropriate tension being applied to the bobbin thread, it is pulled through the fabric when the upper thread is pulled up. For this reason, the thread is visible from the right side of the fabric. ■ Remedy/check details Correctly install the bobbin thread. (page 14) APPENDIX 4 Tangled thread on wrong side of fabric ■ Symptom • The thread becomes tangled on the wrong side of the fabric. • After starting sewing, a rattling noise is made and sewing cannot continue. • Looking under the fabric, there is tangled thread in the bobbin case. 57