Brother International Innov-is NS80e Operation Manual - Page 13
Caution
![]() |
View all Brother International Innov-is NS80e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Changing the Machine Settings ■ Changing the needle stop position The needle position when stitching is finished can be changed from the down position to the up position. Press the needle position button and hold for a approximately 3 seconds. The machine beeps twice, and the needle stop position changes to the up position. Changing the Machine Settings ■ Turning on/off the buzzer The buzzer can be turned off. Press and hold "-" stitch width key while turning on a the machine. 1 GETTING READY The machine starts up with no beep, and the buzzer is turned off. Memo • When the same operation is performed, the machine beeps once, and the buzzer is turned on. CAUTION • When the needle stop position or initial needle position is changed, the machine will beep, even if the buzzer has been turned off. Memo • When the same operation is performed, the machine beeps once, and the needle stop position changes to the down position. • When this setting is changed, the machine beeps, even if the buzzer is turned off. ■ Changing the initial needle position (For 80/ 60/50 stitches models) The stitch automatically selected when the machine is turned on can be changed from "1 Straight stitch (Left)" to "3 Straight stitch (Middle)". Press and hold the "-" stitch length key while turning a on the machine. The machine beeps once, and the initial needle position changes to "3 Straight stitch (Middle)". Memo • When the same operation is performed, the machine beeps once, and the initial needle position changes to "1 Straight stitch (Left)". • When this setting is changed, the machine beeps, even if the buzzer is turned off. 11
![](/manual_guide/products/brother-international-innovis-ns80e-operation-manual-cb10c75/13.png)