Brother International MFC-J4420DW Basic Users Guide - Page 64
the print head. Reconnect the power cord., until the print head moves
View all Brother International MFC-J4420DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
f Using both hands, use the finger holds on each side of the machine to lift the scanner cover (1) into the open position. 1 g Slowly pull the jammed paper (1) out of the machine. IMPORTANT • If paper is jammed under the print head, unplug the machine from the power source, and then move the print head to release the paper. • If the print head is in the right corner as shown in the illustration, you cannot move the print head. Reconnect the power cord. Hold down until the print head moves to the center. Then unplug the machine from the power source and remove the paper. 1 h Move the print head (if necessary) to remove any paper remaining in this area. Make sure paper scraps are not left in the corners of the machine (1) and (2). • If ink gets on your skin or clothing, immediately wash it off with soap or detergent. i Gently close the scanner cover using the finger holds on each side. 1 2 j Reconnect the power cord. 52