Brother International MFC-J4420DW Basic Users Guide - Page 77
Dial Tone detection, Telephone Line Interference or VoIP System, e
View all Brother International MFC-J4420DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Dial Tone detection B Setting the dial tone to Detection will shorten the dial detect pause. a Press (Settings). b Press All Settings. c Press a or b to display Initial Setup. d Press Initial Setup. e Press a or b to display Dial Tone. f Press Dial Tone. g Press Detection or No Detection. h Press . Telephone Line Interference or VoIP System B If you are having problems sending or receiving a fax due to possible interference on the telephone line, or if you are using a VoIP system, we recommend that you change the modem speed to minimize errors in fax operations. a Press (Settings). b Press All Settings. c Press a or b to display Initial Setup. d Press Initial Setup. e Press a or b to display Compatibility. f Press Compatibility. Troubleshooting g Press Normal or Basic(for VoIP). Basic(for VoIP) reduces the modem speed to 9,600 bps and turns off color fax receiving and Error Correction Mode (ECM), except for color fax-sending. Unless interference is a recurring problem on your telephone line, you may prefer to use it only when needed. To improve compatibility with most VoIP services, Brother recommends changing the compatibility setting to Basic(for VoIP). Normal sets the modem speed at 14,400 bps. h Press . NOTE VoIP (Voice over IP) is a type of phone system that uses an Internet connection, rather than a traditional phone line. B 65