Home » Brother International Manuals » Multifunction Devices » Brother International MFC-J625DW » Manual Viewer

Brother International MFC-J625DW Advanced Users Manual - English - Page 50

Setting your changes as the new default, Restoring all settings to the factory settings - paper jam

View all Brother International MFC-J625DW manuals

Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

Chapter 7 m The screen shows: Set the next page, then press Scan. When you finish, press Complete. Place the next page on the scanner glass and press Scan. Press OK. The machine starts printing. n If you pressed Sort for multiple copies, repeat step m for each additional page. After all the pages have been scanned, press Complete. The machine starts printing. DO NOT touch the printed page until it is ejected the second time. The machine will print the first side and eject the paper and then pull the paper in to print the second side. Note If you get a paper jam, press Advanced after step h, and then press one of the jam prevention settings: Duplex1 or Duplex2. Duplex1 uses a longer print time for the ink to dry. Duplex2 uses a longer print time and will also print in lighter colors. Setting your changes as the new default 7 You can save the settings for the copy options you use most often by setting them as the default, such as Quality, Enlarge/Reduce, Density, Page Layout and Duplex Copy (MFC-J625DW only). These settings will stay until you change them again. a Press (COPY). b Press Options. c Press s or t to display the available settings, and then press the setting you want to change. Press s or t to display the available options, and press the option you want. Repeat this step for each setting you want to change. d After changing the last setting, press s or t to display Set New Default. e Press Set New Default. f Press OK. The screen asks you again to confirm if you want to set the change as the new default. Press Yes. g Press Stop/Exit. Restoring all settings to the factory settings 7 You can restore the copy settings that you have changed to the factory settings, such as Quality, Enlarge/Reduce, Density, Page Layout and Duplex Copy (MFC-J625DW only). a Press (COPY). b Press Options. c Press s or t to display Factory Reset. d Press Factory Reset. e Press Yes. f Press Stop/Exit. 44

Section	Page
ADVANCED USER’S GUIDE MFC-J280W MFC-J625DW	1
User's Guides and where do I find it?	2
Table of Contents	3
1 General setup	7
IMPORTANT NOTE	7
Memory storage	7
Volume Settings	7
Ring Volume	7
Setting the Ring Volume from the menu	7
Beeper Volume	8
Speaker Volume	8
Automatic Daylight Saving Time	9
Sleep Mode	9
LCD screen	10
LCD Contrast	10
Setting the backlight brightness	10
Setting the Dim Timer for the backlight	11
Mode Timer	11
2 Security features	12
TX Lock	12
Setting and changing the TX Lock password	12
Setting the password	12
Changing the password	13
Turning TX Lock on/off	13
Turning TX Lock on	13
Turning TX Lock off	13
3 Sending a fax	14
Additional sending options	14
Sending faxes using multiple settings	14
Stop faxing	14
Contrast	14
Changing fax resolution	15
Setting your changes as the new default	15
Restoring fax settings to the factory settings	16
Additional sending operations	16
Sending a fax manually	16
Sending a fax at the end of a conversation	17
Dual Access (Black & White only)	17
Broadcasting (Black & White only)	17
Before you begin the broadcast	17
How to broadcast a fax	17
Canceling a Broadcast in progress	18
Real Time Transmission	18
Overseas Mode	19
Delayed Faxing (Black & White only) (MFC-J625DW only)	19
Delayed Batch Transmission (Black & White only) (MFC-J625DW only)	20
Checking and canceling waiting jobs	20
Polling overview (MFC-J625DW only)	21
Polled Transmit (Black & White only)	21
Setup for polled transmit	21
4 Receiving a fax	22
Memory Receive (Black & White only) (MFC-J625DW only)	22
Receiving faxes into memory when paper tray is empty	22
Fax Forwarding	22
Paging	23
Fax Storage	24
Printing a fax from the memory	24
PC-Fax Receive (Windows® only)	25
Changing the destination PC	25
Turning off Memory Receive operations	26
Changing Memory Receive operations	26
Remote Retrieval (MFC-J625DW only)	27
Setting a Remote Access Code	27
Using your Remote Access Code	27
Remote Fax commands	28
Retrieving fax messages	29
Changing your Fax Forwarding number	29
Additional receiving operations	30
Printing a reduced incoming fax	30
Receiving a fax at the end of a conversation	30
Polling overview (MFC-J625DW only)	31
Polling receive	31
Setup to receive polling	31
Sequential polling (Black & White only)	31
Canceling a Sequential Polling Job	32
5 Dialing and storing numbers	33
Voice operations	33
Tone or Pulse (Canada only)	33
Fax/Tel mode	33
Caller ID	33
Setting up your area code (USA only)	34
Special line considerations	34
Roll-over telephone lines	34
Two-line telephone system	34
Converting telephone wall outlets	35
Installing machine, external two-line TAD and two-line telephone	35
Additional dialing operations	36
Outgoing Call	36
Caller ID history	36
Dialing access codes and credit card numbers	37
Additional ways to store numbers	38
Storing Speed Dial numbers from Outgoing Calls	38
Storing Speed Dial numbers from the Caller ID history	39
Setting up Groups for Broadcasting	40
Changing a Group name	40
Deleting a Group	41
Deleting a number from a Group	41
6 Printing reports	42
Fax reports	42
Transmission Verification Report	42
Fax Journal (activity report)	42
Reports	43
How to print a report	43
7 Making copies	44
Copy settings	44
Stop copying	44
Changing copy quality	44
Enlarging or reducing the copied image	45
Making N in 1 copies or a poster (Page Layout)	46
2 in 1 ID Copy	47
Sorting copies using the ADF (MFC-J625DW only)	48
Adjusting Density	48
Duplex (2-sided) copying (MFC-J625DW only)	49
Setting your changes as the new default	50
Restoring all settings to the factory settings	50
8 PhotoCapture Center™: Printing photos from a memory card or USB Flash memory drive (MFC-J625DW only)	51
PhotoCapture Center™ operations	51
Memory cards, USB Flash memory drive and folder structures	51
Print Images	52
Print Index (Thumbnails)	52
Printing Photos	53
Printing All Photos	53
DPOF printing	54
PhotoCapture Center™ print settings	54
Print Quality	54
Paper options	55
Paper Type	55
Paper and print size	55
Adjusting Brightness, Contrast and Color	56
Brightness	56
Contrast	56
Color Enhancement (True2Life™)	56
Cropping	57
Borderless printing	58
Print Date	58
Setting your changes as the new default	58
Restoring all settings to the factory settings	59
Scan to a memory card or USB Flash memory drive	59
How to set a new default	59
How to reset to the factory settings	60
9 Printing photos from a camera (MFC-J625DW only)	61
Printing photos directly from a PictBridge camera	61
PictBridge requirements	61
Setting your digital camera	61
Printing Images	62
DPOF printing	63
Printing photos directly from a digital camera (without PictBridge)	63
Printing Images	64
A Routine maintenance	65
Cleaning and checking the machine	65
Cleaning the outside of the machine	65
Cleaning the machine’s printer platen	66
Cleaning the paper feed rollers	67
Cleaning the paper pick-up rollers	68
Checking the ink volume	69
Packing and shipping the machine	69
B Glossary	72
Index	76

Match case Limit results 1 per page

Chapter 7

The screen shows:

Place the next page on the scanner

glass and press

Scan

Press

The machine starts printing.

If you pressed

Sort

for multiple copies,

repeat step

for each additional page.

After all the pages have been scanned,

press

Complete

The machine starts printing.

DO NOT touch the printed page until it is

ejected the second time. The machine will

print the first side and eject the paper and

then pull the paper in to print the second side.

Note

If you get a paper jam, press

Advanced

after step

, and then press one of the

jam prevention settings:

Duplex1

Duplex2

Duplex1

uses a longer print time for the

ink to dry.

Duplex2

uses a longer print time and will

also print in lighter colors.

Setting your changes as the

new default

You can save the settings for the copy

options you use most often by setting them as

the default, such as

Quality

Enlarge/Reduce

Density

Page Layout

and

Duplex Copy

(MFC-J625DW only). These settings will stay

until you change them again.

Press

(

COPY

Press

Options

Press

to display the available

settings, and then press the setting you

want to change. Press

to display

the available options, and press the

option you want.

Repeat this step for each setting you

want to change.

After changing the last setting, press

to display

Set New Default

Press

Set New Default

Press

The screen asks you again to confirm if

you want to set the change as the new

default.

Press

Yes

Press

Stop/Exit

Restoring all settings to the

factory settings

You can restore the copy settings that you

have changed to the factory settings, such as

Quality

Enlarge/Reduce

Density

Page Layout

and

Duplex Copy

(MFC-J625DW only).

Press

(

COPY

Press

Options

Press

to display

Factory Reset

Press

Factory Reset

Press

Yes

Press

Stop/Exit

Set the next page, then press

Scan. When you finish, press

Complete.