Brother International MFC-J870DW Quick Setup Guide - Page 33

For Wireless Network Users 17 Manual setup from the control panel using the Setup Wizard (Windows®, Macintosh and mobile devices) You must have the wireless settings you wrote down for your network in step 16-b on page 30 before you proceed. a Press . Press Setup Wizard. When Enable WLAN? or Switch Network interface to wireless? is displayed, press Yes to accept. This will start the wireless setup wizard. To cancel, press No. b The machine will search for available SSIDs. It will take several seconds to display a list of available SSIDs. If a list of SSIDs is displayed, press a or b to choose the SSID you wrote down in step 16-b on page 30. Press OK. If the wireless access point/router of the selected SSID supports WPS and the machine asks to use WPS, go to c. If the machine asks you to enter a Network Key, go to d. Otherwise, go to e. NOTE • If the list is blank, check that the wireless access point/router has power and is broadcasting the SSID. Move your machine closer to the wireless access point/router and try starting from a again. • If your access point is set to not broadcast the SSID, you will have to manually add the SSID name. For more information, see Configure Your Wireless Network When the SSID Is Not Broadcast in the Software and Network User's Guide. c Press Yes to connect your machine using WPS. (If you choose No (Manual) to continue manual configuration, go to d to enter a Network Key.) When the Touchscreen instructs you to start WPS, press the WPS button on your wireless access point/router, and then press Next to proceed. Go to e. d Enter the Network Key you wrote down in step 16-b on page 30 using the Touchscreen. NOTE Press to cycle between lower case and upper case. Press to cycle between letters, numbers and special characters. (The characters available may differ depending on your country.) To move the cursor to the left or right, press d or c. (For more information, see Entering Text for Wireless Settings on page 44.) Press OK when you have entered all the characters, then press Yes to apply your settings. e Your machine will now try to connect to your wireless network. It may take a few minutes. Wireless setup is now complete. The Wi-Fi LED on the control panel lights up, indicating that the machine's Network I/F is set to WLAN. NOTE For mobile device users: • Connect your mobile device to a wireless access point/router using Wi-Fi connection. • Download and install Brother iPrint&Scan (Android™/iOS/Windows® Phone) from your mobile device's application download site. You can also use AirPrint (iOS) with this machine. • To download the User's Guide for the application you are using (Brother iPrint&Scan/AirPrint), visit the Brother Solutions Center at http://solutions.brother.com/ and click Manuals on your model's page. To install MFL-Pro Suite, continue to step 18. For Windows® users: Now go to Page 37 For Macintosh users: Now go to Page 40 Wireless Network 33