Brother International MFC-J870DW Quick Setup Guide - Page 34
One-push setup using, WPS or AOSS™
View all Brother International MFC-J870DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
For Wireless Network Users 17 One-push setup using WPS or AOSS™ (Windows®, Macintosh and mobile devices) a Confirm your wireless access point/router has the WPS or AOSS™ symbol as shown below. b Place the Brother machine within range of your WPS or AOSS™ access point/router. The range may differ depending on your environment. Refer to the instructions provided with your access point/router. c Press . Press WPS/AOSS. When Enable WLAN? or Switch Network interface to wireless? is displayed, press Yes to accept. This will start the wireless setup wizard. To cancel, press No. NOTE If your wireless access point/router supports WPS and you want to configure your machine using the PIN (Personal Identification Number) Method, see Configure Your Wireless Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS) in the Software and Network User's Guide. d When the Touchscreen instructs you to start WPS or AOSS™, press the WPS or AOSS™ button on your wireless access point/router (for more information, see the instructions provided with your wireless access point/router), and then press OK on your machine. NOTE For mobile device users: • Connect your mobile device to a wireless access point/router using Wi-Fi connection. • Download and install Brother iPrint&Scan (Android™/iOS/Windows® Phone) from your mobile device's application download site. You can also use AirPrint (iOS) with this machine. • To download the User's Guide for the application you are using (Brother iPrint&Scan/AirPrint), visit the Brother Solutions Center at http://solutions.brother.com/ and click Manuals on your model's page. To install MFL-Pro Suite, continue to step 18. For Windows® users: Now go to Page 37 For Macintosh users: Now go to Page 40 This feature will automatically detect which mode (WPS or AOSS™) your wireless access point/router uses to configure your machine. Wireless setup is now complete. The Wi-Fi LED on the control panel lights up, indicating that the machine's Network I/F is set to WLAN. 34