Brother International MFC-J870DW Quick Setup Guide - Page 4

NOTE If you are sharing one telephone line with an external telephone answering machine, connect it as shown below. Before you connect the external telephone answering machine, remove the white protective cap a from the EXT. jack on the machine. 1 a Protective cap (MFC-J650DW) Carefully guide the telephone line cord out to the back of the machine. (MFC-J870DW and MFC-J875DW) Carefully guide the telephone line cord from the LINE jack into the cable channel and out the back of the machine. Carefully guide the telephone line cord from the EXT. jack into the cable channel and out to the right side of the machine. Set the receive mode to External TAD if you have an external answering machine. See Choose the correct Receive Mode on page 10. For additional details, see Connecting an external TAD (telephone answering device) in chapter 6 of the Basic User's Guide. 3 Install the ink cartridges CAUTION If ink gets in your eyes, wash it out with water at once and call a doctor if you are concerned. NOTE Make sure you install the Starter Ink Cartridges included with your machine first. a Make sure that the power is turned on. The Touchscreen will show No Ink Cartridge. NOTE You can adjust the control panel angle to read the Touchscreen more easily. Hold the edge of the control panel to avoid accidentally pressing any of the Touchscreen options. b Open the ink cartridge cover a. 1 4