Campbell Scientific IRGASON IRGASON Integrated CO2/H2O Open-Path Gas Analyzer - Page 22
Connect the IRGASON, Sonic Anemometer
View all Campbell Scientific IRGASON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
IRGASON® Integrated CO2/H2O Open-Path Gas Analyzer and 3D Sonic Anemometer 2. Connect the IRGASON sonic cable. Similar to (a), begin by removing the black- rubber cable-entry plug found on the bottom left of the EC100 enclosure. Insert the cable entry plug on the cable into the slot and connect the male end to the female connector labeled Sonic Anemometer on the EC100 electronics (see FIGURE 6-5). The sonic cable is approximately 3 meters in length. FIGURE 6-5. EC100 electronics front panel with enhanced barometer. At left, as received from Campbell Scientific. At right, all wiring and connections complete. 12
IRGASON
®
Integrated CO
2
/H
2
O Open-Path Gas Analyzer and 3D Sonic Anemometer
2.
Connect the IRGASON
sonic cable.
Similar to (a), begin by removing the
black- rubber cable-entry plug found on the bottom left of the EC100
enclosure.
Insert the cable entry plug on the cable into the slot and
connect the male end to the female connector labeled
Sonic Anemometer
on the EC100 electronics (see FIGURE 6-5).
The sonic cable is
approximately 3 meters in length.
FIGURE 6-5.
EC100 electronics front panel with enhanced barometer.
At left, as received from Campbell Scientific. At right, all wiring and
connections complete.
12