Campbell Scientific IRGASON IRGASON Integrated CO2/H2O Open-Path Gas Analyzer - Page 45
Bits in the Sonic Diagnostic Flag, Output Modes for EC100 Instruction
View all Campbell Scientific IRGASON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
IRGASON® Integrated CO2/H2O Open-Path Gas Analyzer and 3D Sonic Anemometer TABLE 10-1. Output Modes for EC100 Instruction Output Data Mode Field 1 2 3 4 0, 1, 2, 5 6 7 8 9 10 1, 2 11 12 2 13 Description Ux Uy Uz Sonic Temperature Sonic Diagnostic Flag CO2 Density H2O Density Gas Diagnostic Flag Air Temperature Air Pressure CO2 Signal Strength H2O Signal Strength Sample Cell Pressure Differential Units m/s m/s m/s ºC mg/m3 g/m3 ºC kPa nominally 0.0 ≤ strength ≤1.0 nominally 0.0 ≤ strength ≤1.0 kPa As shown in TABLE 10-1, all output modes give two diagnostic values: Sonic Diagnostic Flag and Gas Diagnostic Flag. The values contain a bit field with each bit representing a monitored condition. When a certain condition is detected, the corresponding bit is set. The value remains set until the event that caused the condition is no longer present. TABLE 10-2 and TABLE 10-3 describe the bits in the sonic diagnostic flag and the gas diagnostic flag, respectively. TABLE 10-2. Bits in the Sonic Diagnostic Flag hex bit value 0 0x1 1 0x2 2 0x4 3 0x8 4 0x10 5 0x20 decimal 1 2 4 8 Name Low Amp High Amp Tracking Hi 3 Axis DC 16 Acquiring 32 Cal Mem Err Function Amplitude is too low Amplitude is too high Poor signal lock Delta temperature exceeds limits Acquiring ultrasonic signals Sonic head calibration signature error 35