Canon EOS R5 C Advanced User Guide VIDEO edition - Page 116
Frame Recording Mode, etup] > [Frame Rec: Frame Rate] > De
View all Canon EOS R5 C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Special Recording Modes 116 3 Press the REC button again to stop recording. • The clip is recorded. The recorded clip will include a few seconds of video and audio recorded before the REC button was pressed. • The tally lamp changes from red to green (power indicator) and the onscreen display changes back to [PRE STBY]. 4 Select > [Æ Recording/Media Setup] > [Recording Mode] > [Normal Recording] to stop pre- recording. NOTES • Pre-recording will be canceled if the recording mode is changed. • About the time code when pre-recording is activated: - The time code of the clip will start a few seconds before the REC button was pressed. - The time code will be recorded with the running mode set to [Free Run]. - If the time code mode was set to [Regen.], or to [Preset] with [Rec Run] running mode, the time code running mode will be changed automatically to [Free Run] when pre-recording is activated. - When the special recording mode is turned off, the time code running mode will return to its previous setting. Frame Recording Mode Set the number of frames in advance. We recommend operating the camera remotely or stabilizing the camera, for example, on a tripod. Sound is not recorded in this mode. You can also use direct touch control to perform this function (A 56). 1 Select > [Æ Recording/Media Setup] > [Recording Mode] > [Frame Recording]. • [FRM STBY] appears on the screen (with [FRM] flashing). 2 Select > [Æ Recording/Media Setup] > [Frame Rec: Frame Rate] > Desired option. 3 Press the REC button to begin recording. • The tally lamp illuminates in red. • [FRM STBY] changes to [FRM ÜREC] while recording. • The camera automatically records the specified number of frames. 4 Repeat until you finish recording. 5 Select > [Æ Recording/Media Setup] > [Recording Mode] > [Normal Recording] to stop frame recording. • Frame recording mode ends and all of the recorded frames are joined together into one clip. • The tally lamp illuminates in green and [STBY] appears on the screen. NOTES • Frame recording cannot be used simultaneously with slow & fast motion recording, pre-recording, interval recording or continuous recording. • Frame recording cannot be used when the frame rate is set to 59.94i or 50.00i. When in use, frame recording will end if the frame rate is set to 59.94i or 50.00i. • The number of frames recorded cannot be changed while recording. • Some frames at the point the recording was stopped may be recorded and added to the end of the clip.