Canon EOS R5 C Advanced User Guide VIDEO edition - Page 148
RAW Video Output from the HDMI OUT terminal, etup] > [Main Rec Format] > [HDMI RAW].
View all Canon EOS R5 C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Connecting to an External Monitor or Recorder 148 • During slow & fast motion recording, interval recording or frame recording, the recording command will not be output. • The time code will not be output from the HDMI OUT terminal in the following cases. - In MEDIA mode. • If > [B System Setup] > [HDMI Output Signal] is set to [1280x720P], when the frame rate is set to 23.98P, the frames value of the time code output from the HDMI OUT terminal will be converted so it runs from 0 to 29. RAW Video Output from the HDMI OUT terminal You can output video in RAW format from the HDMI OUT terminal while recording video to card 2. 1 Select 2 Select [Off]. 3 Select > [Æ Recording/Media Setup] > [Main Rec Format] > [HDMI RAW]. > [Æ Recording/Media Setup] > [2nd Card Rec Functions] > an option other than > [Æ Recording/Media Setup] > [Sensor Mode]. Video Output Configuration Main recording video configuration Main recording format Sensor mode* HDMI RAW Full frame Super 35mm (Cropped) Super 16mm (Cropped) Frame rate 29.97P 24.00P 23.98P 25.00P 59.94P 50.00P 29.97P 24.00P 23.98P 25.00P HDMI OUT terminal Resolution Frame rate 59.94P 60.00P 59.94P 50.00P 4096x2160 59.94P 50.00P 29.97P 24.00P 23.98P 25.00P * Bit depth will be 10 bit when [Sensor Mode] is set to [Full Frame]/[Super 35mm (Cropped)], and 12 bit when set to [Super 16mm (Cropped)]. NOTES • Image will not be displayed correctly when connected to a device that is not compatible with the camera's HDMI RAW output function. • When the main recording format is [HDMI RAW], the following functions cannot be output from the HDMI OUT terminal: - Any of the > [¢ Monitoring Setup] > [B&W Image:], [Anamorphic:], [OSD Output:], [OSD Opacity:], [OSD Orientation:] or [Range:] options. - Any of the > [A Assistance Functions] > [Peaking:], [False Color:], [Zebra:], [WFM:] or [Markers:] options. • > [Æ Recording Media/Setup] > [Recording Mode] is set to [Normal Recording]. • > [¢ Monitoring Setup] > [View Assist:] functions cannot be used. • > [A Assistance Functions] > [Magn. Output] > [HDMI] cannot be used. • > [B System Setup] > [HDMI Output Signal] and [Linked to HDMI Monitor] cannot be adjusted. • [Output: 60 60(24)fps] and [Output: 60 60(30)fps] cannot be used.