Canon EOS R5 C Advanced User Guide VIDEO edition - Page 118

Special Recording Modes 118 Continuous Recording Audio and video are recorded on both cards in this mode, normal recording on card 1, and continuous recording on card 2. This function can be used when the main recording format is set to MP4. Video will be recorded in MP4 format and audio will be recorded in linear PCM format. With the exception of step 5, you can also use direct touch control to perform this function (A 56). 1 Insert a card into each card slot (slot 1 for normal recording, slot 2 for continuous recording). 2 Select > [Æ Recording/Media Setup] > [Recording Mode] > [ Main / Continuous Rec]. • The continuous recording mode is activated and [CONT] appears on the screen next to the card 2 indicator. 3 Select > [Æ Recording/Media Setup] > [Continuous Recording] > [REC]. • The tally lamp changes from green (power indicator) to red and continuous recording starts on card 2. The onscreen display changes to [ÜCONT]. 4 Press the REC button to start recording. • Normal recording on card 1 starts. • If you press the button before step 3, recording will start on both cards. 5 Select > [Æ Recording/Media Setup] > [Continuous Recording] > [STBY]. • The tally lamp changes from red to green (power indicator) and recording stops on both cards. The onscreen display changes to [CONT]. 6 Select > [Æ Recording/Media Setup] > [Recording Mode] > [Normal Recording] to turn off continuous recording. NOTES • When continuous recording is activated, if recording on card 2 (continuous recording) is not available, normal recording will not be possible either. • Continuous recording will continue even if card 1 becomes full. • If [Continuous Recording] is set to [STBY] and the main recording format is changed to an option other than MP4, continuous recording will be canceled.