Canon FAX-JX210P User's Guide - Page 32

8 Press [Start/Copy]. z Press [Start/Copy] when using directory dialing. z The fax scans the document into memory. Note If appears on the LCD during scanning, delete unnecessary documents from the memory (see page 40), then rescan your fax. 9 The fax will automatically dial at the programmed time. „ Sending Other Documents While the Fax is Set for Delayed Sending You can send, receive, and copy other documents even when the fax is set for sending at a preset time. To send or copy other documents after setting the fax for delayed sending, simply send or copy using any other sending procedure in this guide. Note Delayed sequential broadcasting is applicable for sending one document to more than one location at a later time when multiple fax numbers are dialed (see page 32). „ Canceling Delayed Sending 1 Press [Menu]. 2 Use [{] or [}] to select , then press [Start/Copy]. 3 Use [{] or [}] to select , then press [Start/Copy]. TX/RX NO. 0001 4 Use [{] or [}] to select the transaction number () of the document you want to delete, then press [Start/Copy]. The LCD displays . z If the LCD does not change after you press [{] or [}], this means only one transaction is stored in memory. z If you are unsure of the transaction number (), print the MEMORY LIST (see page 39). 5 Press [ ] to delete the document. If you want to continue sending, press [#]. 6 Press [Stop/Reset]. The fax returns to standby mode. Sending Faxes 31