Canon FAX-JX210P User's Guide - Page 47

Name ACTIVITY REPORT AUTO PRINT TX/RX SEPARATE „ TX SETTINGS Name ECM TX PAUSE TIME AUTO REDIAL REDIAL TIMES REDIAL INTERVAL DIAL TONE DETECT „ RX SETTINGS Name ECM RX FAX/TEL AUTO SW RING START TIME TEL RING TIME DEFAULT ACTION INCOMING RING RING COUNT MAN/AUTO SWITCH RING TIME REMOTE RX REMOTE RX ID SAVE RX IMAGE OPTION SETTINGS DRPD:SELECT FAX Description Settings Enable/disable automatic printing of the ACTIVITY REPORT. - When you set ON, your fax is set to print the ACTIVITY ON/OFF REPORT for every 20 transactions (sending and receiving). Divide the activity management report into sent and received ON/OFF transactions. Description Settings Enable/disable error correction during transmission. ON/OFF Set the length of the pause you insert into a dialing sequence. 1 to 9 seconds Determine whether the fax will redial a number if it fails to get ON/OFF a response on the first attempt. Set the number of retries. 1 to 10 times Set the period of time between redialing attempts. 2 to 99 minutes Set whether to send faxes after detecting the dial tone. This ON/OFF function may not work correctly with some telephone lines. Description Settings Enable/disable error correction during reception. ON/OFF This feature is used to answer calls, and if no fax tone is - detected, the fax rings to alert you of an incoming call. Set the duration that the fax listens for a fax tone before starting to ring. 0 to 20 seconds Set the length of time the fax will ring to alert you of an incoming call. 10 to 45 seconds Select the action taken after the TEL RING TIME expires. DISCONNECT/ RECEIVE Set the fax to ring when it receives a call. ON/OFF Set the number of incoming rings before the fax answers. 2 to 30 times Determine if the fax switches to document receive mode after ON/OFF the fax rings for a specified time when the fax is in the manual receive mode. Set the amount of time the fax will ring before switching to document receive mode. 1 to 60 seconds Enable/disable remote receiving. ON/OFF If you set REMOTE RX to ON, you can select the remote receiving ID. 00 to 99 Set whether to save images received. ON/OFF Set whether the fax prints out received documents even when the ink level is low. Faxes will be deleted from memory after printing. If there is no ink left, the information contained in the fax will be lost. This setting will be retained even if the FINE cartridge is replaced with a new cartridge. ON/OFF If you select DRPD as the receive mode, select the ring pattern for the fax. DOUBLE RING/ SHORT-SHORT-LONG/ SHORT-LONGSHORT/ OTHER RING TYPE/ NORMAL RING 46 Settings and Activity Reports