Canon FAX-JX210P User's Guide - Page 52
Setting Automatic Printing, What is a Low Ink Warning?, Press [Start/Copy]. - fax machine cartridge
View all Canon FAX-JX210P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Note z The resulting print quality may not be satisfactory, if printing is continued under this condition. z When the ink level is low, the print quality may become poor, and the machine will start storing incoming fax data in the memory. z The FAX cannot detect whether or not the received data are clearly printed on the paper. z The FAX automatically deletes the received fax data in the memory after printing them. We recommend you to set to (see page 46). You can store the received fax data in the memory for no more than 30 transactions. Delete them before the memory becomes full. z Setting Automatic Printing When the ink is low, you can set the receiving fax either automatic printing or storing in memory. 1 Press [Menu]. 2 Use [{] or [}] to select , then press [Start/Copy]. The LCD displays . 3 Use [{] or [}] to select , then press [Start/Copy]. The LCD displays . 4 Use [{] or [}] to select , then press [Start/Copy]. The LCD displays . z To disable ink low automatic printing, use [{] or [}] to select . z To enable automatic printing, use [{] or [}] to select . 5 Press [Start/Copy]. 6 Press [Stop/Reset]. The fax returns to standby mode. What is a Low Ink Warning? The machine counts the amount of ink used and when the remaining level reaches a preset level the Low Ink Warning lamp beside the LCD display lights up to advise you that the FINE Cartridge is running out of ink. z When , or appears on the LCD. RECOMEND NEW CRT ] NO INK The ink level of the FINE Cartridge showing is low. The ink level of the FINE Cartridge showing is empty. You should ensure you have a new FINE Cartridge. z When appears on the LCD. INK VOL UNKNOWN If you install the FINE Cartridge that was once empty, appears in the LCD. The function for detecting the remaining ink level will be disabled since the ink level cannot be correctly detected. If you want to continue printing without this function, press [Stop/Reset] for at least 5 seconds. Routine Maintenance 51