Canon Microfilm Scanner 350II MS-350II Instruction Manual. 3.01 MB - Page 13
About operation modes
![]() |
View all Canon Microfilm Scanner 350II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
■ BEFORE YOU BEGIN ... ■ About operation modes The following operating modes are available with this scanner. Select one of the following modes according to your system environment before using the scanner. For details, contact your service representative. ❏ Scanner mode Using this scanner in connection with a personal computer, the image projected on the scanner's screen can be saved in the PC as image data, or printed out through a printer connected to the PC. ❏ DMP mode By installing the optional DMP board in the scanner and connecting it to a DMP-dedicated printer, the MS350II can be used as a digital microfilm printer (DMP). The image projected on the scanner's screen can be printed out through the DMP-dedicated printer. In this case, no personal computer is required. ❏ Reader-printer mode Using the CapturePerfect bundled with the MS350II, the scanner that is set to the Scanner mode will operate as if it is set to the DMP mode. The image projected on the scanner's screen can be printed out directly through a printer connected to the personal computer. In this case, however, the image cannot be saved in the PC as image data. When the DMP board is installed in this scanner, switch the "DMP mode" and "scanner mode" in the user mode before use. (➞P.45 "USER MODE") If the computer is connected with the user mode set to "DMP mode" when the DMP board is installed in this scanner and the MS350II is used as a scanner, the operation panel may not be operable or other problems may occur. CE-IE-335-01 11 11 07.5.14, 14:19
![](/manual_guide/products/canon-microfilm-scanner-350ii-ms350ii-instruction-manual-301-mb-b84c92a/13.png)