Canon Microfilm Scanner 350II MS-350II Instruction Manual. 3.01 MB - Page 23
Preparing the computer, scanner mode
![]() |
View all Canon Microfilm Scanner 350II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
■ BEFORE YOU BEGIN ... ■ Preparing the computer (scanner mode) In addition to the accessories provided in the product package, the following are required to use the scanner in scanner mode. ■ Hardware requirements • CPU: Intel Celeron 733MHz or better • Main memory: minimum of 256MB • Hard disc space: minimum of 400MB • SCSI card and SCSI cable, or Hi-speed USB2.0 interface port • Display: Minimum screen resolution of 1024 x 768 (XGA) • If you are not sure about the system requirements, contact an authorized Canon dealer or your computer manufacturer' s support center. • If your CPU, memory or SCSI board does not meet the recommended specifications, you may experience problems such as slow scanning or a slow data transfer rate. • Even if your computer meets the above requirements, slow scanning may occur depending on the scanner settings. ■ Operating system requirements Depending on the connection, operating system requirements differ as follows: • When using a SCSI card: • Microsoft Windows 98SE • Microsoft Windows Me • Microsoft Windows 2000 Professional SP4 or later • Microsoft Windows XP Professional SP2 or later • Microsoft Windows XP Home Edition SP2 or later • When using a USB connection: • Microsoft Windows 2000 Professional SP4 or later • Microsoft Windows XP Professional SP2 or later • Microsoft Windows XP Home Edition SP2 or later The scanner does not support USB connectivity with Windows 98SE and Windows Me. Use a SCSI connection instead. CE-IE-335-01 21 21 07.5.14, 14:19
![](/manual_guide/products/canon-microfilm-scanner-350ii-ms350ii-instruction-manual-301-mb-b84c92a/23.png)