Canon Microfilm Scanner 350II MS-350II Instruction Manual. 3.01 MB - Page 46
Stop/Clear key C
![]() |
View all Canon Microfilm Scanner 350II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
■ Printing (DMP mode) ■ If using the multi-purpose tray, set paper size of the multi-purpose tray. (1) Press the Cassette Select key for about 2 seconds to enter the paper cassette select mode. When the multi-purpose tray lamp ( ) begins to blink, you can now set paper size. At that time, the current paper size appears on the Print/Error display. (2) Press the Print Number Setting key (+ or -) to set the appropriate paper size. The size indicator will be displayed on the Print/Error display as follows: Display Setting A4 Letter B5 Legal (3) Press the Cassette Select key to complete the setting. 3. Set the number of prints that you want to make (1 to 99). Press the Print Number Setting key on the operation panel or the operation keyboard to set the number of prints. If you press the plus (+) key, the number increases, and if you press the minus (-) it decreases. If you want to change the number you have already set, press the Clear/Stop key (C/ ) to reset the number to 1, and then set the number of prints you want to make once again. 4. Make the Print mode settings if required. 5. Press the Print key on the operation panel or the operation keyboard to start printing. You can cancel printing at any time by pressing the Stop/Clear key (C/ ). 44 CE-IE-335-01 44 07.5.14, 14:20
![](/manual_guide/products/canon-microfilm-scanner-350ii-ms350ii-instruction-manual-301-mb-b84c92a/46.png)