Canon Microfilm Scanner 350II MS-350II Instruction Manual. 3.01 MB - Page 25
Connecting via USB, USB port, USB cable, Connecting to a Computer, Other, Software, Printer
![]() |
View all Canon Microfilm Scanner 350II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
■ BEFORE YOU BEGIN ... ■ ■ Connecting via USB USB connectivity is achieved through the use of a SCSI-USB converter connected to the scanner's SCSI port. Connecting via USB means that scanning speeds are slightly slower than when using the SCSI port. • USB port • Use the Hi-Speed USB 2.0 port that is equipped normally to the computer. • Install the latest Microsoft USB 2.0 drivers. For details, contact an authorized Canon dealer. • Complete functionality using the USB interface is not guaranteed. For details, contact an authorized Canon dealer. • USB cable Use the supplied USB cable or a Hi-Speed USB 2.0 cable. ■ Connecting to a Computer Setup, configuration, and connection of the scanner to the computer should be done by the supervising service personnel. To change the connection or settings, contact an authorized Canon dealer or service professional. • The interface cable for connecting to the computer should match the interface used during setup. • You cannot use a SCSI and a USB connection at the same time. Before changing the interface, make sure to contact an authorized Canon dealer or service professional. ■ Other • Software • The ISIS-compatible application software or TWAIN-compatible application software that operate normally on the operation system described above. • The ISIS/TWAIN driver provided with the scanner is not necessarily compatible with all ISIS-compatible or TWAIN-compatible application software. For details, contact your application software dealer. • Printer The printer that operates normally under your operation system. CE-IE-335-01 23 23 07.5.14, 14:19
![](/manual_guide/products/canon-microfilm-scanner-350ii-ms350ii-instruction-manual-301-mb-b84c92a/25.png)