Canon Microfilm Scanner 350II MS-350II Instruction Manual. 3.01 MB - Page 44
Setting the print mode, Switching the operation modes
![]() |
View all Canon Microfilm Scanner 350II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
■ SETTING THE SCANNER ■ 1st character 2nd character 3rd character 4th character 32nd character 33rd character • Maximum note length is 33 characters including spaces. • The Brightness display shows your current location within the note, as described on the left. 6. When you have finished entering the note, press the Clear/ Stop key to save it. The MS350II writes the note into memory and returns to normal operating mode. If you want to make a change in the setting, press the Brightness Adjustment ( ) key to go back to a setting you want to change, and then change the setting. Setting the print mode This section describes various print settings that you can use to control the quality and format of the printouts. Make the appropriate settings before you start printing. PICTURE SHARPNESS ■ Picture mode Use this mode for accurate printing of halftone graphic images. You can switch the mode on or off by pressing the Picture key on the operation keyboard. The lamp to the left of the key comes on to indicate that the scanner is in the Picture mode. To reset it, press the Picture key again to turn off the "Picture" lamp. Automatic density adjustment (AE) does not function while the scanner is in the Picture mode. ■ Sharpness adjustment Follow the procedure described below when you need to sharpen or soften the image. 1. Press the SHARPNESS key on the operation keyboard so that the [SHARPNESS] lamp begins to blink. 2. Press the right or left Brightness Adjustment key to sharpen or soften the image. You can set the sharpness to one of five levels. The Brightness display moves to reflect your new setting. 3. Press the SHARPNESS key once again to register the new setting. Switching the operation modes You can switch the operation mode (DMP mode or Scanner mode) of the scanner. Press the function key assigned as the [DMP] key so that the lamp comes on to switch to the DMP mode. 42 CE-IE-335-01 42 07.5.14, 14:20
![](/manual_guide/products/canon-microfilm-scanner-350ii-ms350ii-instruction-manual-301-mb-b84c92a/44.png)