Canon Microfilm Scanner 350II MS-350II Instruction Manual. 3.01 MB - Page 57
Service Call Errors
![]() |
View all Canon Microfilm Scanner 350II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
■ MAINTENANCE AND TROUBLESHOOTING ■ Service Call Errors Every time you turn on the main unit, the unit automatically performs a self-diagnostic test. If the unit detects a problem at power on, or at any other time during operation, it will display a Service Call Error message in the display. A Service Call Error is indicated by an error code consisting of an "E" followed by three digits ("Ennn" where "n" indicates a number). This code is displayed in 2 parts as "En" followed by "nn". (Eg. "E123" is displayed as "E1" followed by "23".) Follow the procedure below when a Service Call Error occurs. 1. Immediately switch off the scanner and wait several minutes. 2. Switch the scanner on again and check the scanner status. When a service call error occurs, it is sometimes possible to resolve the problem simply by switching the scanner off for a while and then switching it on again. ■ If the "E000" (fixer error) is displayed The service call error "E000" is a printer fixer error. Switch off the scanner and any peripheral units such as the carrier, unplug the power cord and contact an authorized Canon service technician. ■ When you cannot clear a service call error Make a note of the error code and the nature of the problem. Then switch off the scanner and any peripheral units such as the carrier, unplug the power cord and contact an authorized Canon service technician. CE-IE-335-01 55 55 07.5.14, 14:20
![](/manual_guide/products/canon-microfilm-scanner-350ii-ms350ii-instruction-manual-301-mb-b84c92a/57.png)