Canon Microfilm Scanner 350II MS-350II Instruction Manual. 3.01 MB - Page 17
Operation panel and keyboard keys, Operation panel keys
![]() |
View all Canon Microfilm Scanner 350II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
■ BEFORE YOU BEGIN ... ■ Operation panel and keyboard keys Operation panel keys This is a summary of the keys on the operation panel. 1 Negative/Positive key 2 Trimming/Border key 3 Brightness indicator 4 Brightness adjustment keys 5 Print/Error Display 6 Print number setting key 7 Clear/Stop key 8 Start key CE-IE-335-01 15 Three settings are available: ( ) In negative film mode produces positive output from nega- tive film images. ( ) In positive film mode, produces positive output from posi- tive images. ( A ) In automatic mode, selects the mode based on the type of film detected.(➞P.36) Use this key to trim the image to be scanned or to remove the black border around the image.(➞P.37) Shows the brightness adjusted using the brightness adjustment key. Use the or key to adjust brightness of the image manually, or the use AE key to adjust it automatically. In the DMP mode, this applies to brightness for printing. Displays the number of prints (01 to 99) in case of the ReaderPrinter mode. Also displays error message(User and Service releated). Use these keys to set the number of prints to make for each image in the Reader-Printer mode or the DMP mode (➞P.11). Also use them to set various settings or confirm the SCSI ID of the scanner. Stops scanning or resets the number of prints. Also defines an area for trimming, or defines a specified time for the power saver mode. When the scanner is connected to the Fileprint 470 and used in the DMP mode, this key is also used to switch to the cassette select mode (➞P.43). In the case of the Scanner mode: press this key to start scanning with the "Panel Start" set to on in the application, or to start scanning in the Reader-Printer mode (➞P.11). In the case of the DMP mode: press this key to start printing. The Print/Error display stays blinking from the time the key is pressed until the time scanning begins. 15 07.5.14, 14:19
![](/manual_guide/products/canon-microfilm-scanner-350ii-ms350ii-instruction-manual-301-mb-b84c92a/17.png)