Canon Microfilm Scanner 350II MS-350II Instruction Manual. 3.01 MB - Page 49
Cleaning mode, Switching the operation modes, Setting the function keys
View all Canon Microfilm Scanner 350II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
■ USER MODE ■ Cleaning mode This mode is enabled when the scanner is connected to the Fileprint 470 and used in the DMP mode so as to clean the fixing rollers of the printer. (➞ P.52 "Cleaning mode") : Normal mode (set at the factory before shipping) : Cleaning mode (Cleaning paper: A4 sized) : Cleaning mode (Cleaning paper: Letter sized) You need to prepare a sheet of paper of the size selected for cleaning and print the cleaning pattern on the paper before you start cleaning the fixing rollers. Switching the operation modes This feature is enabled when the optional DMP board is installed in the scanner so as to switch to either of the following modes. : Scanner mode : DMP mode (set at the factory before shipping) The MS350II can be used as a scanner even if the operation mode is set to the [DMP mode]; however, the Reader-Printer mode will be disabled in this case. To enable the Reader-Printer mode, be sure to switch to the [Scanner mode]. Setting the function keys You can make setting of the features assigned to the function keys on the operation keyboard. (➞ P.39 "Setting the function keys (DMP mode)") : DISABLED : DATE : NOTE : PICTURE : SHARPNESS : DMP MODE CE-IE-335-01 47 47 07.5.14, 14:20