Canon PIXMA MX300 MX300 series Quick Start Guide - Page 10
Turning the Machine On and Off, Turning on the Machine - installation
View all Canon PIXMA MX300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Turning the Machine On and Off Turn on the machine before printing. Turning on the Machine Before turning on the machine, confirm the following. z The FINE Cartridges are installed properly. If you are using the machine connected to a computer, confirm also the following. z The machine is connected to your computer (or a compatible device). z The MP Drivers are installed. Note If preparatory operations above are not complete, follow your setup sheet to complete them. 1 Press the ON/OFF button to turn on the machine. The Power lamp flashes and then remains lit green. Important If the Alarm lamp lights up or flashes orange and an error message is displayed on the LCD, see "An Error Message Is Displayed on the LCD" on page 76. 2 If you are using the machine connected to a computer, turn on your computer. Turning off the Machine 1 To turn off the machine, press the ON/OFF button. When the Power lamp stops flashing, the machine is turned off. Important About the Power Plug When removing the power plug after turing off the machine, be sure to confirm that the Power lamp is not lit. If the power plug is removed from the wall outlet with the Power lamp still lit or flashing green, the machine may become unable to print. See "Keeping the Best Printing Results" on page 70. Note The power cannot be turned off while the machine is sending or receiving a fax, or when there are unsent faxes stored in the machine's memory. 6 Before Using the Machine