Canon PowerShot A510 PowerShot A520/A510 Camera User Guide - Page 47
Press the FUNC., button and select, Drive Mode, using the, button., Select, button and press
View all Canon PowerShot A510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
The Basics z The lower indicator will light yellow when the shutter button is pressed halfway. z Shooting procedures are the same as for the Mode (p. 33). z Always use the LCD monitor to compose images in macro mode. Shooting with the viewfinder is possible, however, part of the image may not appear in the actual shot (p. 35). z When the lens is zoomed out to the wide angle end*1, the recordable area is approx. 60 x 44 mm (2.4 x 1.7 in.), and at telephoto end*2, it is approx. 84 x 63 mm (3.3 x 2.5 in.). When the zoom position is located between the telephoto end and the wide angle end, the distance between the front of the lens and the subject will be the same as the telephoto end. z The exposure may not be optimal when the flash is used in macro mode. *1 Closest focal distance. *2 Maximum optical telephoto setting. Shooting - The Basics Self-timer Mode Dial * The cannot be set in and modes. 1 Press the FUNC. button and select *(Drive Mode) using the or button. * The current setting is displayed. 2 Select , or using the or button and press the FUNC. button. z When is selected, the shutter release will be delayed for 10 seconds, and when is selected, the shutter release will be delayed for 2 seconds, after you press the shutter button all the way. 45