Canon PowerShot Pro70 PowerShot Pro70 Software Guide - Page 12

Installing the Software Loading Images onto a Windows Computers Installing the software contained on the PowerShot Solution CD-ROM is the first procedure to complete before you can start loading images onto your computer. Computer System Requirements Your computer system must satisfy the following requirements to operate the bundled software. Operating System: Windows 95, Windows 98 or Windows NT 4.0 CPU: 486DX2/66 MHz or higher (Pentium recommended) RAM: 24 MB or more (32 MB or more recommended) 32 MB or more recommended for Windows NT Free Disk Space: TWAIN Driver 2.3: 15 MB or more ZoomBrowser 1.1: 30 MB or more SlideShow Maker 1.2: 20 MB or more TimeTunnel 2.3: 30MB or more PhotoStitch 2.2: 40 MB or more PhotoImpact 4.0: 130 MB or more Ports: Standard RS-232C interface (PowerShot Pro70) D-SUB 9-PIN connector Monitor: 640 x 480 pixels, 256 colors or more (1,024 x 768 pixels, 32,000 colors or more recommended) Sound Card: Required to play sound annotations • CD-ROM Drive is required for software installation. • QuickTime Version 3.0 or later is required to save PhotoStitch images in QuickTime VR format. Installation Procedures The following programs can be installed from the PowerShot Solution CD-ROM. • TWAIN Driver 2.3 Install this program if you intend to use PhotoImpact, ZoomBrowser or other TWAIN-compliant application programs to load images from the camera. • Slide Show Maker 1.2 • TimeTunnel 2.3 10