Canon PowerShot Pro70 PowerShot Pro70 Software Guide - Page 15

Loading Images onto a Macintosh Computers Connecting to the Computer to Load Images Now that you have finished installing the required software, connect the camera to the computer and try your hand at uploading images. Connecting to the Computer Use the IFC-100PC interface cable to connect the camera to the computer. • When connecting these devices, always ensure that the computer is shut off and the camera's mode dial is set to lock. • Since transferring files between the computer and the camera is relatively power- intensive, it is advisable to power the camera with an AC power source. 1. Turn off the computer and set the camera's mode dial to lock. 2. Open the camera's terminal cover and connect the IFC-100PC interface cable to the digital terminal. Mode Dial Terminal Cover Digital Terminal IFC-100PC Interface Cable 3. Connect the other end of the cable to the computer's serial port (COM port). Serial Port (COM Port) 4. Turn on the computer. 5. Set the camera's mode dial to PC. IFC-100PC Interface Cable 13