Canon SELPHY ES2 SELPHY ES2 / ES20 Printer User Guide - Page 74
Charging the Battery Pack, the printer. - power adapter
View all Canon SELPHY ES2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Charging the Battery Pack Install the battery pack NB-ES1L and charge it. • It takes approximately 4 hours to bring a depleted battery pack to a full charge state (based on standard Canon testing criteria). - We recommend recharging the battery pack in a temperature of 5 - 40 °C (41 - 104 °F). - The charging time will vary depending on the ambient temperature and charge state. • If Auto Power Down is set to [On], the printer will automatically turn off when powered by the battery if it is not used for five minutes or more. 1 Install the battery pack in the printer. • For details on how to install, refer to Installing the Battery Pack (p. 73). 2 Connect the compact power adapter to the printer. Situate the printer with at least 15 cm (6 in.) of free space in front and back and at least 10 cm (4 in.) of free space on the sides. 2 • The power lamp lights orange while charging and turns off once the battery pack is fully charged. • If the printer's power turns on while charging the battery pack, charging will stop. If the power is turned off again, charging will resume. • Turn the printer power off and turn it on again if the battery does not start charging. To power outlet 15 cm (6 in.) 15 cm (6 in.) 10 cm (4 in.) • For more connection details, refer to Placing/ Connecting the Printer (p. 22). • Charging starts. 3 Disconnect the compact power adapter cord from the printer once charging is complete. 74 Using the Battery Pack (SELPHY ES2 only)