Canon SELPHY ES2 SELPHY ES2 / ES20 Printer User Guide - Page 98
Trim Setting Adjusted, Cartridge not compatible
View all Canon SELPHY ES2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Error Messages This camera cannot print B/W Insert memory card to print • Black and white printing is not possible when a camera is connected (except when (PictBridge) is displayed on the LCD monitor of the camera). Insert a memory card to print. Cartridge has been changed • The cartridge was changed for a cartridge of a different size after the print menu was displayed. Insert a cartridge of the same size or change the print settings. Cartridge has been changed Trim Setting Adjusted • If the cartridge is changed after the trimming setting have been made, the printer automatically sets the trimming frame again to fit the paper size. Cartridge not compatible • Use a cartridge that is compatible with this printer. Communication error • Turn the printer, camera and computer power off, then turn on again. • Check the Printing Images When Connected with Camera section (p. 53). If the error message continues to display, contact a Canon Customer Support center for assistance. Disconnected • Make sure that the printer and the sender are in appropriate distance. • Check the sender's power supply. Print output tray is full • Remove accumulated paper from the print receptacle. Cartridge incorrectly inserted or not loaded • Load the cartridge. • Remove the cartridge and insert the cartridge all the way, then close the cartridge cover. 98 Troubleshooting