Canon VB-S900F User Manual - Page 147
Recreation Required] is displayed, click [Exec] in [Recreate Video Management
View all Canon VB-S900F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Troubleshooting Problem Countermeasures The camera cannot be controlled. • If you connect the Admin Viewer as an administrator, you will have exclusive possession of the camera control privileges. If you connect to the Admin Viewer as an Authorized User, you cannot control the camera unless the administrator releases camera control. Consult the Administrator (p. 120). • The pan, tilt, focus and zoom may operate abnormally if the pan and tilt operational durability estimates are exceeded (p. 127). The viewer gets disconnected. • Check the network and computer for abnormality. • Reboot the computer and connect again. You forgot your password. • You can initialize all settings of the camera excluding date and time using the reset switch (p. 159). The administrator password required for initialization is "camera". Note, however, that network settings such as the IP address and subnet mask will be initialized and must be set again. Data cannot be uploaded. • Check the upload destination in the [Upload] menu, as well as the upload operation upon event in the [Event] menu, to see if both are set correctly. • You can perform an operation check based on the currently set upload destination by 7 running a test (p. 52) from the [Upload] menu. • Check [Maintenance] > [View Logs] or logs on the server to check the detailed operating environment. For [View Logs], see "Application (Uploader) Messages" (p. 149). Also see "Important" in p. 51. • For the server settings, contact your System Administrator. Appendix You cannot use recording-mode stream transmission. • You cannot use recording-mode stream transmission if [Upload] > [Upload] is set to HTTP or FTP. Set [Upload] to [Upload Disabled] (p. 51). Video cannot be recorded on a memory card. • To record video to a memory card when an event occurs, check the [Video Record Action] settings under [Event] in the setting page. When [Video Record Action] is set to [Upload], change it to [Record to Memory Card]. • When recording-mode stream video that could not be transmitted due to network errors or video for which the HTTP/FTP upload failed is not stored on the memory card, check [Operation Settings] under [Memory Card] in the setting page. When [Operation Settings] is set to [Save Log], change it to [Save Logs and Videos]. • To manually save recordings to a memory card, obtain camera control privileges. Files cannot be saved in the Settings page or • Windows prohibits saving to certain folders. Accordingly, an attempt to save a file may Admin Tools. fail. Specify [Documents], [Pictures] and other folders. A message indicating "Cannot access the memory card. Please recreate the video management information on the Setting page." appears when an attempt is made to start up the Recorded Video Utility. • Select [Memory Card Information] under [Memory Card] in the setting page to check [Video Management Information Status]. When [Video Management Information Recreation Required] is displayed, click [Exec] in [Recreate Video Management Information] under [Memory Card Operations]. When video management information has been recreated, make sure that [Video Management Information Status] is [Normal]. 147