Canon VB-S900F User Manual - Page 57
External Device Output, External Device Output for OFF Event]
View all Canon VB-S900F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
[Event] Setting Video Record, Volume Detection, External Device Output/Input and Timer necessary to set the presets with the Preset Setting (3) [Pulse Output Time (sec)] Tool under Admin Tools (p. 90). If there is no need for Enter the pulse output time in the range of 1 to 120 additional camera operation, select [None]. (sec.). This setting is available when [Active Output (9) [Video Record] Format] is [Pulse]. Specify the video record action. If [Enable] is selected, video will be transmitted to the destination selected in [Video Record Action] (p. 56) when a Important When [Active Output Format] is set to [Pulse] and a timer is 4 volume detection event occurs. used, a single contact output is controlled when the timer starts. Setting Page (10)[E-mail Notification] Select the e-mail notification operation to be performed. If [Enable] is selected, e-mail notification is performed when a volume detection event occurs. To use this function, [Upload] > [E-mail Notification] must also be set (p. 53). (11)[External Device Output for ON Event] Select whether external device output is active or inactive upon an ON event. Select [Disable] to disable external device output. Note [Normally Open] means that the contacts are normally in the open state (that the circuit is non-conductive), and [Normally Close] means that the contacts are normally in the closed state (that the circuit is conductive). Normally Open Active Event 1 (Terminals close) Inactive Event 0 (Terminals open) (12)[External Device Output for OFF Event] Select whether external device output is active or inactive upon an OFF event. Select [Disable] to disable external device output. Normally Close Inactive Event Active Event 1 (Terminals close) 0 (Terminals open) Important • For notes on use of volume detection, see "Safety Precautions" in "Precautions for Use of Built-In Camera Functions and Included Software" (p. 7). • When Admin Viewer/VB Viewer has camera control privileges, those camera control privileges are released if the camera is moved to a preset position, specified in the [Preset] settings (VB-S30D/VB-S31D only), by a volume detection event operation. External Device Input External Device Output (1) [Operation Mode] Select the normal (inactive) circuit condition. When [Normally Open] is selected, the output terminals remain in the open state during normal operation, and the terminals close upon an active event and open upon an inactive event. When [Normally Close] is selected, the output terminals remain in the closed state during normal operation, and the terminals open upon an active event and close upon an inactive event. (2) [Active Output Format] Select [Pulse] or [Continuous] for the external device output format. (1) [External Device Input Event] Set external device input events to [Disable] or [Enable]. (2) [Operation Mode] Select the circuit condition of the connected external device. When [Normally Open] is selected, an active event occurs when the terminals of the external device close, and an inactive event occurs when the terminals open. When [Normally Close] is selected, an active event occurs when the terminals of the external device open, and an inactive event occurs when the terminals close. (3) [Active Event Operation] Select the operation to be performed upon an active event. If [Enable] is selected, (6) [Preset], (7) [Video Record] and (8) [E-mail Notification] will be executed according to their settings upon an active event. 57