Home » Canon Manuals » Video Cameras » Canon VB-S900F » Manual Viewer

Canon VB-S900F User Manual - Page 49

[RTP] RTP Server, Audio Multicast and RTP Streaming, RTP Server, Audio Multicast, RTP Streaming 1 to 5

Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

[RTP] RTP Server, Audio Multicast and RTP Streaming The following can be set here. • RTP Server Enable RTP, and set the RTSP authentication method and port number. • Audio Multicast Make settings for multicast audio transmission. • RTP Streaming 1 to 5 Make settings for RTP streaming of video, multicasting, and audio transmission. value reaches 0, the signal can no longer be distributed. For example, if TTL is set to [1], multicast 4 distribution is confined to the local segment only and cannot be distributed by the router. Setting Page RTP Streaming 1 to 5 You can make settings for each stream, RTP Streaming 1 to RTP Streaming 5, in a 5-session RTP stream distribution. RTP Server (1) [RTP] Set RTP to [Disable] or [Enable]. (2) [RTSP Authentication Method] Set the RTSP authentication method to [Basic Authentication], [Digest Authentication], or [No Authentication]. (3) [RTSP Port] Set the RTSP port number to 554 or in the range of 1024 to 65535. Normally [554] (factory default setting) is used. Audio Multicast (1) [Multicast Address] Set the multicast address for audio transmission in the range 224.0.0.0 to 239.255.255.255 (IPv4) or an address beginning with ff00::/8 (IPv6). To disable Multicast, set to [0.0.0.0] (IPv4) or [::0(::)] (IPv6). (2) [Multicast Port] Set the multicast port number for audio transmission to an even number in the range 1024 to 65534. To disable Multicast, set to [0]. (3) [Multicast TTL] Set the effective scope of multicast distribution between 0 and 255. To disable Multicast, set to [0]. The TTL (Time To Live), representing the effective scope of multicast distribution, is decremented each time the signal passes through a router. When the (1) [Video Size] Select [480x270 JPEG], [960x540 JPEG], [1920x1080 JPEG], [H.264(1)], or [H.264(2)] for the format and size of video for RTP streaming. [H.264(1)] and [H.264(2)] cannot be set for multiple RTP streams. (2) [Frame Rate] Set the frame rate if the RTP stream is JPEG video. Cannot be configured for H.264. (3) [Multicast Address] Set the multicast address for RTP streaming in the range 224.0.0.0 to 239.255.255.255 (IPv4) or an address beginning with ff00::/8 (IPv6). To disable Multicast, set to [0.0.0.0] (IPv4) or [::0(::)] (IPv6). (4) [Multicast Port] Set the multicast port number for RTP streaming to an even number in the range 1024 to 65534. To disable Multicast, set to [0]. (5) [Multicast TTL] Set the effective scope of multicast distribution for RTP streaming between 0 and 255. To disable Multicast, set to [0]. The TTL (Time To Live), representing the effective scope of multicast distribution, is decremented each time the signal passes through a router. When the value reaches 0, the signal can no longer be distributed. For example, if TTL is set to [1], multicast distribution is confined to the local segment only and cannot be distributed by the router. (6) [Audio Transmission] Set RTP streaming audio transmission to [Disable] or [Enable]. 49

Section	Page
Introduction	2
Disclaimer	2
Notes on Network Security	2
Copyright	2
Notes on Privacy and Publicity Rights Regarding the Use of Video/Audio	2
Trademark Notice	3
Notes on the Included Software RM-Lite ( Disclaimer )	3
Notes on License Agreement for Included Software	3
Only for European Union and EEA (Norway, Iceland and Liechtenstein)	3
Open Source Software	4
Security Export Control	4
How to Read This Operation Guide	5
User Manuals	5
How to use this Operation Guide	5
Icons Indicating Particular Camera Models	5
Symbols Indicating Safety Precautions	5
Safety Precautions	6
Maintenance	8
Disposing of the Camera	8
Chapter 1 Before Use	13
Features	14
Camera Software	15
Installed Software	15
Included Software	15
Additional License (Sold Separately)	15
Network Video Recording Software (Sold Separately)	15
RM-Lite (See the “Administrator Manual”)	17
Operating Environment	18
VB Initial Setting Tool, Admin Viewer/VB Viewer, Admin Tools	18
RM-Lite	18
Notes on Operating Environment	19
Notes on Use When the [Windows Firewall] Function is Enabled	19
Notes on Use with Internet Explorer 9 or Greater and Windows Server 2008/Windows Server 2012	19
Notes on Use with Windows Server 2008/Windows Server 2012	20
Notes on Use with Windows Vista/Windows 7/Windows 8/Windows Server 2012	21
Notes for Windows 8/Windows Server 2012	21
Chapter 2 Initial Settings	23
Preparing the Camera for Use	24
Installing the Necessary Software	26
Notes on Use with Internet Explorer 9 or Greater and Windows Server 2008/Windows Server 2012	27
Performing Initial Settings for the Camera	28
Checking the Camera Video	29
Chapter 3 Top Page of the Camera	31
Accessing the Top Page of the Camera	32
Accessing the Top Page of the Camera	32
User Authentication	32
Chapter 4 Setting Page	33
Setting Menu	34
Accessing the Setting Menu	35
Setting Menu	35
Items Common to All Setting Pages	35
[Network] Setting Administrator Password, LAN, IP Address, DNS, etc	37
[Date and Time] Setting Date and Time	40
[Camera] Setting Initial Camera Settings and External Device Name	42
[Video] Setting Video Size, Quality and Frame Rate	46
[RTP] RTP Server, Audio Multicast and RTP Streaming	49
[Upload] Setting HTTP/FTP Upload and E-mail Notification	51
[Server] Setting the Video Server, Audio Server and HTTP Server	54
[Event] Setting Video Record, Volume Detection, External Device Output/Input and Timer	56
[Access Control] Setting User Access Privileges	60
[IPsec] Setting IPsec	62
[SSL/TLS] Setting HTTP Communication Encryption	65
[802.1X] Network Port Authentication Settings	67
[Memory Card] Memory Card Operations and Settings	69
[Reboot Item] Setting Items Requiring Rebooting	72
[Maintenance] Viewing Current Settings, Event Logs and Performing Maintenance	73
[Camera Angle] Digital Zoom Settings	74
Chapter 5 Admin Tools	75
Admin Tools Overview	76
Admin Tools	76
Privacy Mask Setting Tool	76
Panorama Creation Tool	76
View Restriction Setting Tool	76
Preset Setting Tool	77
Intelligent Function Setting Tool	77
Log Viewer	77
Recorded Video Utility	77
Accessing the Admin Tools	78
Launching the Admin Tools	78
Privacy Mask Setting Tool	79
Display Screen of Privacy Mask Setting Tool	79
Setting the Privacy Mask Area	80
Changing/Deleting a Privacy Mask Area	82
Panorama Creation Tool	83
Display Screens of Panorama Creation Tool	84
Capturing a Panorama Image	84
Saving/Deleting a Panorama Image on the Camera	85
Saving a Panorama Image as Image Files/Opening from Image Files	85
View Restriction Setting Tool	86
Display Screens of View Restriction Setting Tool	87
Setting View Restrictions	88
Preset Setting Tool	90
Display Screens of Preset Setting Tool	91
Setting the Preset	92
Preset Tour	95
Intelligent Function Setting Tool	97
Display Screen of Intelligent Function Setting Tool	100
Flow of Intelligent Function Setting	101
Setting Intelligent Function Detection Settings	103
Log Viewer	109
Display Screens of Log Viewer	109
Downloading Log Files	110
How to View Logs	110
Recorded Video Utility	112
Display Screens of Recorded Video Utility	112
Confirming Recorded Video	113
Narrowing Down the Number of Videos	113
Downloading Video	114
Exporting to Video Files That Can Be Played Back	114
Playing Back Videos	114
Deleting Videos	116
Displaying Memory Card Information	116
Control for Admin	117
Using Control for Admin	117
Chapter 6 Admin Viewer/VB Viewer	119
Overview of Viewer	120
Major Differences Between the Admin Viewer and the VB Viewer	120
User Authorities and Camera Control Privileges	120
Launching the Viewer	123
Launching the Viewer	123
Shutting Down the Viewer	123
Connecting from Admin Tools	123
How to Operate the Viewer	124
Display Screens of Admin Viewer	124
VB Viewer	125
Obtaining Camera Control Privileges	126
Controlling the Camera	127
Cropping and Displaying Part of Video (Digital PTZ)	128
Setting Video and Audio	130
Checking Information	132
Performing Operations and Settings in the Admin Viewer	133
Magnifying Part of the Video (Viewer PTZ)	133
Using Control for Admin	134
Displaying Event Status	139
Recording to a Memory Card Manually	140
Chapter 7 Appendix	141
Memory Card Access	142
Modifiers	144
Troubleshooting	146
List of Log Messages	148
Log Messages on the Camera	148
List of Viewer Messages	157
Messages Displayed in the Information Field	157
Restore Default Settings	159
Restoring the Initial Setting from the Maintenance Page in the Web Browser	159
Restoring Factory Default Settings with the Reset Switch on the Camera	159
List of Factory Default Settings	161
Specifications	168

Match case Limit results 1 per page

etting Page

RTP Server

(1) [RTP]

Set RTP to [Disable] or [Enable].

(2) [RTSP Authentication Method]

Set the RTSP authentication method to [Basic

Authentication], [Digest Authentication], or [No

Authentication].

(3) [RT

P Port]

Set the RTSP port number to 554 or in the range of

1024 to 65535.

Normally [554] (factory default setting) is used.

Audio Multicast

(1)

[Multicast Address]

Set the multicast address for audio transmission in the

range 224.0.0.0 to 239.255.255.255 (IPv4) or an

address beginning with ff00::/8 (IPv6).

To disable Multicast, set to [0.0.0.0] (IPv4) or [::0(::)]

(IPv6).

(2)

[Multicast Port]

Set the multicast port number for audio transmission

to an even number in the range 1024 to 65534.

To disable Multicast, set to [0].

(3)

[Multicast TTL]

Set the effective scope of multicast distribution

between 0 and 255.

To disable Multicast, set to [0].

The TTL (Time To Live), representing the effective

scope of multicast distribution, is decremented each

time the signal passes through a router. When the

value reaches 0, the signal can no longer be

distributed. For example, if TTL is set to [1], multicast

distribution is confined to the local segment only and

cannot be distributed by the router.

RTP Streaming 1 to 5

You can make settings for each stream, RTP Streaming 1

to RTP Streaming 5, in a 5-session RTP stream

distribution.

(1) [Video

ize]

Select [480x270 JPEG], [960x540 JPEG], [1920x1080

JPEG], [H.264(1)], or [H.264(2)] for the format and

size of video for RTP streaming.

[H.264(1)] and [H.264(2)] cannot be set for multiple

RTP streams.

(2)

[Frame Rate]

Set the frame rate if the RTP stream is JPEG video.

Cannot be configured for H.264.

(3)

[Multicast Address]

Set the multicast address for RTP streaming in the

range 224.0.0.0 to 239.255.255.255 (IPv4) or an

address beginning with ff00::/8 (IPv6).

To disable Multicast, set to [0.0.0.0] (IPv4) or [::0(::)]

(IPv6).

(4)

[Multicast Port]

Set the multicast port number for RTP streaming to an

even number in the range 1024 to 65534.

To disable Multicast, set to [0].

(5)

[Multicast TTL]

Set the effective scope of multicast distribution for

RTP streaming between 0 and 255.

To disable Multicast, set to [0].

The TTL (Time To Live), representing the effective

scope of multicast distribution, is decremented each

time the signal passes through a router. When the

value reaches 0, the signal can no longer be

distributed. For example, if TTL is set to [1], multicast

distribution is confined to the local segment only and

cannot be distributed by the router.

(6)

[Audio Transmission]

Set RTP streaming audio transmission to [Disable] or

[Enable].

[RTP]

RTP Server, Audio Multicast and RTP Streaming

The following can be set here.

•

RTP

erver

Enable RTP, and set the RTSP authentication

method and port number.

•

Audio Multicast

Make settings for multicast audio transmission.

•

RTP

treaming 1 to 5

Make settings for RTP streaming of video,

multicasting, and audio transmission.