Canon VB-S900F User Manual - Page 50
The [Access Control] > [User Authority] > [Video Distribution]
View all Canon VB-S900F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Note • RTP stream URL rtsp://IP_address:port_number/rtpstream/config1(~5)=r|u|m [=r|u|m] is optional and can be omitted. If specified, specify only one option. r: Requests RTP over TCP u: Requests RTP over UDP m: Requests multicast Example: RTP streaming 1 request using RTP over TCP rtsp://192.168.100.1:554/rtpstream/config1=r Note that the actual operation is dependent on the RTP client application, so the URL does not necessarily specify the method used for transmission. • The video quality and, when H.264 is selected, bit rate control, video size, and frame rate, are determined by the [Video] settings. • Regardless of the [Server] > [Audio Server] > [Audio Transmission from the Camera] setting, RTP streaming audio will be used. However, to use audio settings, select [Enable] for [Audio Transmission from the Camera] and make the settings. • The [Access Control] > [User Authority] > [Video Distribution] and [Audio Distribution] settings are not used for RTP. • RTP streaming video may not be viewable on systems using a proxy server or firewall. If the video cannot be viewed, contact the system administrator. • If host access restrictions are applied to a client while it is streaming using RTP over UDP, it may take from a few to several seconds until streaming ceases. 50