Canon VB-S900F User Manual - Page 60
[Access Control] Setting User Access Privileges, Authorized User Account, User Authority
View all Canon VB-S900F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
[Access Control] Setting User Access Privileges The following can be set here. • Authorized User Account Register who can access this camera. • User Authority Set the authorities for authorized users and guest users. • IPv4 Host Access Restrictions Specify the hosts from which IPv4 access is permitted and restricted. • IPv6 Host Access Restrictions Specify the hosts from which IPv6 access is permitted and restricted. Authorized User Account (1) [User Name], [Password] Enter the user name and password and then click [Add]. The authorized user will be added to the user list. The user name can consist of up to 15 (single-byte) characters using A to Z, a to z, 0 to 9, "-" (hyphen) and "_" (underscore). The password can consist of 6 to15 (single-byte) ASCII characters (space or printable characters). (2) [User List] A list of authorized users is shown. User authorities can be set for these users. Up to 50 users can be registered in addition to the Administrator (root). Also, the user list can be sorted using the S T buttons on the right. To delete a user, select the applicable user from the user list and then click [Delete]. User Authority [Privileged Camera Control], [Camera Control], [Video Distribution], [Audio Distribution] Set the user authorities of authorized users and guest users. Select the checkboxes corresponding to the items you want to permit for each user. Note Authorized users have higher authorities than guest users. For details, see "User Authorities and Camera Control Privileges" (p. 120). IPv4 Host Access Restrictions (1) [Apply Host Access Restrictions] Set IPv4 host access restrictions to [Disable] or [Enable]. (2) [Default Policy] If IPv4 host access restrictions are applied, select [Authorize Access] or [Prohibit Access] for the default policy. (3) [Network Address / Subnet] Create a list of permitted hosts and restricted hosts and set IPv4 address access for each host to [Yes] or [No]. You can specify the subnet and set access restrictions by network or host. If access is prohibited, access to all ports is restricted. Important • To prohibit access via a proxy server in HTTP connection, a proxy server address must be set. • If host access restriction is set mistakenly, access to the setting pages themselves may be prohibited, in which case restoring the factory default settings will become the only means for recovery. Note If the same address is duplicated, the policy for the address that appears highest on the list will be applied. 60