Canon imagePROGRAF iPF6400 User Guide - Page 102

Borderless Printing by Resizing Originals to Fit the Roll Width 13 Make sure the C Page Size setting matches the original size as selected in C Paper Size in the Page At- tributes dialog box-in this case, 10"x12". iPF6400 Enhanced Printing Options Borderless Printing 14 Select the D Enlarged/Reduced Printing check box. 15 Select the H Borderless Printing check box. 16 Click E Fit Paper Size under D Enlarged/Reduced Printing. 17 In I Paper Size, click the paper size. In this case, click 10"x12" - Borderless. 18 Confirm the print settings, and then click M Print to start printing. • For tips on confirming print settings, see "Confirming Print Settings →P.364 " Note Borderless Printing by Resizing Originals to Fit the Roll Width Take advantage of borderless printing to print documents such as posters (made up mainly of photos or images) without a surrounding margin, or border. In regular printing, a margin required by the printer is added around the original. With borderless printing, you can print documents without the margin, so that the printed image covers the entire surface of the paper. • Borderless printing is only available with rolls. • Paper you can use for borderless printing is restricted to particular types of paper and rolls of particular widths. (See "Paper Reference Guide.") • Although it normally prints borderless on the top, bottom, left, and right (4-edge borderless), in the following cases, it becomes borderless only on the left and right (2-edge borderless) because the top and bottom of the printed image are not automatically cut. • When paper where the borderless printing is described as two edges only in the Paper Reference Guide (paper where printed image areas cannot be cut cleanly) is selected • When the following settings are made in the printer control panel • Cutting Mode is Manual • CutDustReduct. is On • When auto cut is configured as not performed in the printer driver 102 User's Guide