Canon imagePROGRAF iPF6400 User Guide - Page 531

Handling and Use of Paper iPF6400 Loading Rolls on the Roll Holder Handling rolls Loading Rolls on the Roll Holder ...531 Loading Rolls in the Printer ...534 Changing the Type of Paper ...536 Specifying the Paper Length ...537 Removing the Roll from the Printer ...538 Removing Rolls From the Roll Holder ...540 Clearing Jammed Roll Paper ...881 Clearing Jammed Paper (Paper Feed Slot) ...880 Feeding Roll Paper Manually ...541 Keeping Track of the Amount of Roll Paper Left 542 Specifying the Ink Drying Time for Rolls ...542 Specifying the Cutting Method for Rolls ...544 Cutting the Leading Edge of Roll Paper Automatically 548 Reducing Dust from Cutting Rolls ...550 Roll Holder Set ...551 Removing the Roll Feed Unit ...551 Installing the Roll Feed Unit ...552 Loading Rolls on the Roll Holder When printing on rolls, attach the Roll Holder to the roll. Rolls have a two- or three-inch paper core. Use the correct attachment for the paper core. The printer comes equipped with the 2-Inch Paper Core Attachment installed. For borderless printing on A1 (594 mm) or A2 (420 mm) rolls, attach the included Spacer for Borderless Printing to the Roll Holder. Using Rolls with a 2-inch Paper Core Holder Stopper Roll Holder Side Using Rolls with a 3-inch Paper Core Holder Stopper Roll Holder Side For 2-inch paper cores No Attachment Needed For 3-inch paper cores 3-Inch Paper Core Attachment Handling rolls • Set the roll on a table or other flat surface so that it does not roll or fall. Rolls are heavy, and dropping a roll may cause injury. Caution 531 User's Guide