Canon imagePROGRAF iPF6400 User Guide - Page 23

Basic Printing Workflow Printing procedure iPF6400 2 Hold down the Power button for more than a second. After "Shut Down.. Please Wait.." is shown on the Display Screen, the printer shuts off. Loading and Printing on Rolls Loading and Printing on Rolls These are the basic steps for loading and printing on rolls. Follow these steps to load and print on rolls. • If you use the optional Stand, you can store printed documents in the Output Stacker. see "Using the Output Stacker." →P.564 • You also can install and use the printer on a table, etc., instead of using the Stand. • Keeping a roll in the printer for a long time without printing on it may leave a depression on the leading edge. Important When printing quality is most important, we recommend setting TrimEdge Reload to On or Automatic so that the paper edge is automatically cut before printing. • Before printing banners or other long documents, tap the Output Stacker. We recommend that you spread a clean cloth or paper on the floor and select Eject as the cutting method for rolls to prevent the printed surface from becoming dirty or scratched. (See "Specifying the Cutting Method for Rolls.") →P.544 • For details on supported sizes and types of rolls, see Paper Sizes or the Paper Reference Guide. (See "Paper Sizes.") Note →P.524 (See "Types of Paper.") →P.524 • To wait until the ink dries after printing before cutting the roll, set Drying Time in the printer driver. (See "Specifying the Ink Drying Time for Rolls.") →P.542 • Once you have used all the paper on a roll, clean the platen. If the Platen inside the Top Cover becomes dirty, it may soil the underside of paper. (See "Cleaning Inside the Top Cover.") →P.861 1 Turn the printer on. (See "Turning the Printer On and Off.") →P.21 23 User's Guide