Canon imagePROGRAF iPF6400 User Guide - Page 544

Specifying the Cutting Method for Rolls 3 In the Paper Detailed Settings dialog box displayed next, select the desired settings values in C Between Pages and D Between Scans in B Drying Time, and then click OK. (See "Paper Detailed Settings Dialog Box (Mac OS X).") →P.370 iPF6400 Handling and Use of Paper Handling rolls Specifying the Cutting Method for Rolls How rolls are cut after ejection varies depending on printer settings. Automatic Eject Cutting Method The roll is automatically cut by the Cutter Unit following printer driver settings. Select this to move the cutter by key operation and cut paper. Although there are cases with Automatic in which the paper falls and the paper surface is scratched, you can avoid damaging the paper with this method since you can cut by holding the paper with your hand so that the paper does not fall when cutting. Also, since you can cut while visually confirming the drying of the ink, you can avoid ejecting paper before the ink has dried. To cut the roll with the Cutter Unit, press the Cut button. Printer Setting Media Menu > Paper Details > (Various Types of Paper) > Cutting Mode Automatic Eject Driver Setting Auto Cut Yes (See "Cut- ting Roll Paper After Yes Printing.") →P.168 Manual Choose this setting when using media that cannot be cut using the Cutter Unit. Use scissors to cut each document from the roll after printing. For continuous printing (if you will cut each page later), select Auto Cut > Yes or select Print Cut Guideline. Manual No Yes Print Cut Guideline Paper Cut- Choose this option if you want to cut pages by pressing Cut button Yes ting Cutter Unit buttons for manual cutting after printing pressed when Auto Cut > No is selected or Print Cut Guide- line is selected in the printer driver. Otherwise choose this option if you want to cut the roll edge after loading a roll. No Print Cut Guideline 544 User's Guide