Canon imagePROGRAF iPF6400 User Guide - Page 925
Messages regarding printing or adjustment, Cannot execute this command. Use other paper.
View all Canon imagePROGRAF iPF6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 925 highlights
iPF6400 Cannot execute this command. Use other paper. Messages regarding printing or adjustment Cannot execute this command. Use other paper 925 Cannot print as specified...925 Cannot adjust printhead...928 Cannot calibrate...925 Excessive temperature or humidity...926 Please execute common calibration...926 Please commn calibrt using above paper...926 Please calibrate using above paper...926 Before borderless printing, move the blue platen switch 926 Borderless printng not possible...921 Blue platen switch is dirty...927 Move the blue platen switch No.xx to the right. (xx represents a number 927 Cannot adjust paper feed...927 Check printed document...927 Cannot execute this command. Use other paper. Cause Paper compatible with color calibration is not loaded. 1. Press the OK button to clear the error. Corrective Action 2. Load paper that is compatible with color calibration. See the Paper Reference Guide. (See Paper Reference Guide.) Always make sure the loaded paper matches the type of paper in the printer paper settings. Adjustment cannot be completed correctly unless the loaded paper matches the settings. Error Message Cannot print as specified. Cause The loaded paper is too small. (When you have attempted to print a test print sheet or other printer status information.) Corrective Action Replace the paper with paper of A4/Letter (vertical) size or larger as follows. 1. Press ▲ or ▼ to select Change Paper, press the OK button, and remove the paper. (See "Removing Sheets.") →P.560 2. Switch to paper A4/Letter (vertical) or larger. (See "Loading and Printing on Sheets.") →P.26 The printer will resume printing. Press ▲ or ▼ to select Stop Printing, and then press the OK button. Messages regarding printing or adjustment Cannot calibrate. Cause The paper for printing a test pattern is soiled. Otherwise, you have loaded colored paper. Corrective Action Press the OK button to clear the error. Load unused paper compatible with color calibration. (See Paper Reference Guide.) The test pattern was printed too faintly. Press the OK button to clear the error. Take steps to remedy faint printing. (See "Printing is faint.") →P.891 925 Direct sunlight or strong lighting may be shining on the Press the OK button to clear the error. printer and causing the sensor to malfunction. Take steps to ensure the printer is not used when exposed to direct sunlight or strong lighting. User's Guide