Canon imagePROGRAF iPF6400 User Guide - Page 915
The paper is too small., Detect Mismatch, Pause, Print, Warning, Stop Printing, Change Paper
View all Canon imagePROGRAF iPF6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 915 highlights
iPF6400 The paper is too small. Cause When Detect Mismatch in the Control Panel menu is set to Pause, the type of paper loaded does not match the type specified in the printer driver. When Detect Mismatch in the Control Panel menu is set to Warning, the type of paper loaded does not match the type specified in the printer driver. Corrective Action 2. Replace the loaded paper with paper of the type and size you have specified in the printer driver. (See "Loading and Printing on Rolls.") →P.23 (See "Loading and Printing on Sheets.") →P.26 Press ▲ or ▼ to select Print, and then press the OK button to resume printing. However, note that this error may cause paper jams and affect the printing quality. You can continue to print, but note that this error may cause problems in the printing results. The paper is too small. Cause When Detect Mismatch in the Control Panel menu is set to Pause, paper smaller than the size specified in the printer driver is loaded. Corrective Action Press ▲ or ▼ to select Print, and then press the OK button to resume printing. However, note that this error may cause paper jams and affect the printing quality. Adjust the paper size setting in the printer driver to match the size loaded in the printer as follows. 1. Press ▲ or ▼ to select Stop Printing, and then press the OK button. 2. Change the paper size setting in the printer driver to the size loaded in the printer and try printing again. Replace the loaded paper with paper of a size that matches the size setting in the printer driver as follows. When Detect Mismatch in the Control Panel menu is set to Warning, paper smaller than the size specified in the printer driver is loaded. 1. Press ▲ or ▼ to select Change Paper, and then press the OK button to stop print- ing. 2. Replace the loaded paper to match the settings in the printer driver and try printing again. (See "Loading and Printing on Rolls.") →P.23 (See "Loading and Printing on Sheets.") →P.26 You can continue to print, but note that this error may cause problems in the printing results. Error Message The paper is too small. Messages regarding paper Cause A sheet has come out of the printer during printing. Corrective Action 1. Press the OK button and remove the sheet. 2. Confirm the paper size and setting. 3. Reload the paper. (See "Loading Sheets in the Feed Slot.") →P.554 The loaded paper is too small. (When you have attempted to print a test print sheet or other printer status information.) Replace the roll with a roll 10 inches in width or larger as follows. 1. Press ▲ or ▼ to select Change Paper, and then press the OK button. (See "Removing the Roll from the Printer.") →P.538 (See "Removing Rolls From the Roll Holder.") →P.540 2. Replace the roll with a roll 10 inches wide or larger. (See "Loading Rolls on the Roll Holder.") →P.531 (See "Loading Rolls in the Printer.") →P.534 The printer will resume printing. 915 Press ▲ or ▼ to select Stop Printing, and then press the OK button. User's Guide