Canon imagePROGRAF iPF6400 User Guide - Page 887

iPF6400 • If the paper is jammed by the Ejection Guide Remove the jammed paper from the Output Tray. After removing the paper, make sure there are no other scraps of paper in the printer. Roll paper cannot be inserted into the paper feed slot • If paper is jammed in the back of the printer Remove the jammed paper from the back of the printer. After removing the paper, make sure there are no other scraps of paper in the printer. 3 Press the OK button. Troubleshooting Problems Regarding Paper Roll paper cannot be inserted into the paper feed slot The roll paper is warped. Cause Corrective Action Straighten out curls and reload the roll. Paper is jammed by the paper feed slot. After a roll was advanced, the paper was manually pulled out by force, closing the Paper Feed Slot. Remove the jammed paper. (See "Clearing Jammed Roll Paper.") →P.881 (See "Clearing a Jammed Sheet, Fed Manually.") →P.884 Remove the roll and open the paper feed slot. (See "Removing the Roll from the Printer.") →P.538 Cannot load sheets Cause Corrective Action The paper source selection is incorrect. Press the Load button and select the paper source. Paper is not cut neatly 887 Cause Corrective Action The paper is bent or curled at the cut position. Straighten out any curling by the edges of the paper. User's Guide