Canon imagePROGRAF iPF6400 User Guide - Page 926

Excessive temperature or humidity. iPF6400 Excessive temperature or humidity. Cause The temperature or humidity where the printer is installed is out of the acceptable range for operation. Corrective Action Press ▲ or ▼ to select Stop, and then press the OK button to stop printing. Use the printer under suitable environmental conditions. Also note that various environmental conditions are recommended for various types of paper. For details on the recommended environmental conditions, see the Paper Reference Guide. (See Paper Reference Guide.) Press ▲ or ▼ to select Continue, and then press the OK button to continue with color calibration. However, note that correct adjustment may not be possible. Please execute common calibration. Cause There is not even one Common calibration execution result. Note that this is displayed when all of the following are satisfied. • If Set Exec. Guide is On in the Control Panel menu. • If the printer is loaded with a type of paper on which color calibration cannot be executed. Corrective Action Execute Common calibration. (See "Color Calibration Using the Printer Sensor.") →P.758 Set Set Exec. Guide to Off on the Control Panel menu. (See "Menu Structure.") →P.643 Please commn calibrt using above paper. Cause It is now recommended that you execute Common calibration. Note that this is displayed when Set Exec. Guide in the Control Panel menu is set to On and any of the following is true. • If the printer is loaded with a type of paper on which color calibration cannot be executed and the predefined condi- tions since executing the Common calibration the last time have been reached. • Although a media type that color calibration can be executed on is loaded in the printer, there is no record or per- forming color calibration on that media, and the designated criteria from executing Common calibration the last time have been reached. Corrective Action Execute Common calibration. (See "Color Calibration Using the Printer Sensor.") →P.758 Set Set Exec. Guide to Off on the Control Panel menu. (See "Menu Structure.") →P.643 Error Message Messages regarding printing or adjustment Please calibrate using above paper. Cause It is now recommended that you execute Unique calibration. Note that this is displayed when Set Exec. Guide in the Control Panel menu is set to On and any of the following is true. • If the printer is loaded with a type of paper on which color calibration can be executed, but there is no record of having executed color calibration on that paper or a record of having executed Common calibration other any other type of paper. • If the printer is loaded with a type of paper on which color calibration can be executed, there is a record of having executed color calibration on that paper, and the predefined conditions since executing the color calibration the last time have been reached. Corrective Action Execute Unique calibration. (See "Color Calibration Using the Printer Sensor.") →P.758 Set Set Exec. Guide to Off on the Control Panel menu. (See "Menu Structure.") →P.643 Before borderless printing, move the blue platen switch. Cause Corrective Action 926 The blue Switch on the platen was set to the side opposite ● when Before borderless printing, set the blue Switch on the platen to the ● side. a borderless print job was received. (See "Setting the Blue Switch on the Platen.") →P.896 User's Guide