Canon imagePROGRAF iPF6400 User Guide - Page 104

Enhanced Printing Options Borderless Printing by Resizing Originals to Fit the Roll Width (Windows) iPF6400 • When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be uneven at the edges. Important If you require higher image quality, select No from the Automatic Cutting list in the Roll Paper Options dialog box. In this case, the paper can be printed without borders on the left and right sides only. Once printed and cut, please cut the upper and lower bands with scissors. • Document: Any type • Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in) • Paper: Roll • Paper type: Canon Heavyweight Coated Paper • Roll paper width: 10 inches (254.0 mm) 1 In the application, create an original that takes up the entire space of the paper size. • If you can specify the margin, as in Microsoft Word, set the margin at 0 mm. For instructions on specifying the mar- Note gin, refer to the software documentation. 2 Choose Print in the application menu. 3 Select the printer in the dialog box, and then display the printer driver dialog box. (See "Accessing the Printer Driver Dialog Box from Applications .") →P.181 4 Make sure the Main sheet is displayed. Borderless Printing 5 In the A Media Type list, select the type of paper that is loaded. In this case, click Canon Heavyweight Coated Paper. 6 Select the print target in the E Print Target list. • When you are using paper that takes longer for ink to adhere for borderless printing and the Cutter Unit touches Important printing surfaces that are not dry yet, it may damage the paper or the edge of the document that is cut, depending on frequency of use. In this kind of situation, change the ink drying time using the following procedure. • Click Advanced Settings in Media Type. 104 • Select an ink drying time in the list for the Between Pages setting of Drying Time. User's Guide