Canon imagePROGRAF iPF6400 User Guide - Page 890

An error message is shown on the Display Screen iPF6400 The printer stops during a print job An error message is shown on the Display Screen 890 The printer ejects blank, unprinted paper ...890 An error message is shown on the Display Screen Cause An error message is displayed during printing. The last portion of roll paper was used during a print job, and paper could not be advanced because the trailing edge is taped to the roll. Corrective Action Check the error message and take action as necessary. (See "Error Messages.") →P.912 Remove the used roll and insert a new roll. (See "Removing the Roll from the Printer.") →P.538 (See "Removing Rolls From the Roll Holder.") →P.540 (See "Loading and Printing on Rolls.") →P.23 The printer ejects blank, unprinted paper Cause The leading edge of the roll paper was cut to straighten it. The Printhead nozzles are clogged. A print job was received from an incompatible printer driver. The printer is damaged. Corrective Action The leading edge of rolls may be cut to straighten it if Trim Edge First is set to a value other than Off in the Control Panel menu. (See "Cutting the Leading Edge of Roll Paper Automatically.") →P.548 Print a test pattern to check the nozzles and make sure the Printhead is in good condition for printing. (See "Checking for Nozzle Clogging.") →P.845 Use the correct imagePROGRAF printer driver for the printer and try printing again. Contact your Canon dealer for assistance. Troubleshooting The printer stops during a print job 890 User's Guide