Canon imagePROGRAF iPF830 Operation Guide - Page 106
The printer stops during a print job, An error message is shown on the Display Screen
View all Canon imagePROGRAF iPF830 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
An error message is shown on the Display Screen iPF830 Series The printer stops during a print job An error message is shown on the Display Screen 106 The printer ejects blank, unprinted paper ...106 An error message is shown on the Display Screen Cause The last portion of roll paper was used during a print job, and paper could not be advanced because the trailing edge is taped to the roll. Corrective Action Remove the used roll and insert a new roll. (See "Removing the Roll from the Printer.") ➔P.18 (See "Removing the Roll Holder from Rolls.") ➔User's Guide (See "Loading and Printing on Rolls.") ➔User's Guide The printer ejects blank, unprinted paper Cause The leading edge of the roll paper was cut to straighten it. The Printhead nozzles are clogged. A print job was received from an incompatible printer driver. The printer has received print data that includes HP RTL commands when Auto Rotate is On in the Control Panel menu. The printer is damaged. Corrective Action The leading edge of rolls may be cut to straighten it if Trim Edge First is set to a value other than Off in the Control Panel menu. (See "Cutting the Leading Edge of Roll Paper Automatically.") ➔User's Guide Print a test pattern to check the nozzles and make sure the Printhead is in good condition for printing. (See "Checking for Nozzle Clogging.") ➔User's Guide Use the correct imagePROGRAF printer driver for the printer and try printing again. In the Control Panel, set Auto Rotate to Off and print again. (See "Menu Settings.") ➔User's Guide Contact your Canon dealer for assistance. Troubleshooting The printer stops during a print job 106 Basic Guide